by Hilux Max on Mon, 02 May 2011 10:35 +0000
you'll get away with a 2" lift, trim the inner guards and fit 33/10.5x15's to the factory SR5 wheels and a good alignment.
If you dont mind the narrower 33" tyre.
You'll benefit from the 32.8" diamter's clearance it provides.
and you'll keep the centre of gravity reasonably low.
If you want the width of the tyre aswell, then yes, you'll need to consider a bodylift as mentioned previously.....do some measurements, if you can get away with 1" over a 2" then do it.
extended ball joint spacers, thou illegal would allow you a slight bit more down travel back if you back off the torsion bars after fitting them, also cutting the bump stops in half or fitting slim ones will aid in slightly more down travel thou illegal aswell.....