thought i'd just post up my quick fix as an add on of mmaaxx's edition for fitting the 285/75's with a 3inch lift, just note the flares are stock sr5 flares so may be slightly different shape under the guards compared to other types.
First i cut a chunk of the flares using a stanly knife, doesn't look the cleanest from inside the guards but unoticable from outside:
Then pull back the black plastic and you'll see the pitchwall so beat the sh## out of this untill its flat against the wall:
Then using an blow touch on a cold flame i heated the plactice and molded it back in position:
Finished and with a good wheel allignment should be fine for town driving, (in my case i still hit the body mount offroad, although mmaaxx was able to get away with it):
I have since chopped the body mounts, as i was getting to much uptravel and will post this up later when i can find the pics