Well ARB finally got some of my gear in, still waiting for the flares but got the bar and side steps. Put the bar on today (Deluxe winch with fog lights) bloody hell that was an effort.
The bar has changed the height of the lift by 10mm so from rim (16inch) to guard is now 780mm. I will wait for the flares before putting the scrub bars on but will fit the side steps when I get a bit more time. Couple of things I didnt like about the ARB fitting.
1. Using scotch locks to connect wiring/relays for the indicators/parker lights. So I spliced into them and soldered all the joints.
2. Cable ties to fasten the under guard to the wings. I used some of the orginal clips from the bumper and drilled and screwed to the wing plates.
3. I used the after market fog lights from e-bay and although they look the part they were a little loose in the brakets so a bit of bending and reshaping had them better. I then adjusted them prior to putting the wings on and squeezed some black silicone into the mounts that has firmed them up.
4. Thought that there could have been a better way to fit the fog light surrounds other than just silicone on and hold in place with tape till it goes off.
Very happy with the look of the bar on the vehicle will post some pics tomorrow. Does look funny with the orginal wheels still on it but I will continue to fight the urge to put the new ones on till the flares are fitted.
Cheers Jason