by roly on Mon, 20 Nov 2006 8:31 +0000
(1)turn the car on , do not start engine(leave you foot off the
brake).cycle your trip reset knob until you it reads odo. turn the
ignition back off. wait a couple of seconds
(2) make sure seat belt is not fastened
(3)turn the ignition back on ,do not start the car(leave your foot off
the brake) as soon as you see everything light up, press and hold the
trip reset knob and do a long 12 second count.
(4)keep your finger on the trip reset knob. fasten your seat belt, as
soon as you fasten your seat belt, you should see the odo display go
from xxxx ks to "b-on". at that time take your finger off the trip
reset
knob and press it again. it should cycle to "b-off". you should be all
set turn the ignition off and unfasten your seat belt.