Gents,
Recently replaced the suspension in my 09 dual cab and I have developed a slight driveshaft vibration. I mentioned it to shop that fitted it and said it's fairly normal. I have spaced the the centre bearing down about 6mm and it is better but still there. It is most noticable when idling in gear(it is an auto), it seems to bounce. There is no vibration at high speed at all. My mechanic spaced the centre bearing and this has improved it a little and I got under to have a look, I used to make, balance and repair driveshafts in another life and found the rear shaft was "out of phase". I know it was in phase when I first got the car as I got under to have a look. My questin is Is it normal to have these drama's after suspension replacement. The components were 250kg constant load EFS springs in the rear with Oztec shocks and Bilstein struts with king springs in the front, about 50mm of lift, it rides so much better, but the vib is annoying me.
Cheers Drew