HPD catch can and new inter cooler arrived today.
![Image](https://uploads.tapatalk-cdn.com/20180412/8f9fe733e71ba738ff77393ddec59016.jpg)
Old vs new intercooler.
![Image](https://uploads.tapatalk-cdn.com/20180412/fd4694e33d2b46b499bfa9fc735989f9.jpg)
A little disappointed in the catch can, I researched for ages and decided to pay the extra money and get one because everyone was raving about them.
The tapped threads for the inlet and outlet hoses still had metal shavings attached. Some of which had fallen and become stuck in the mesh filters.
I then opened it up and noticed more bits of metal. These were from the edges of the filters as they’ve just been cut out and the edges snap off easily.
One of the hoses was no where near long enough to run it the way they pictured so I had to re route it and cut it shorter.
There was also a mounting bolt missing.
![Image](https://uploads.tapatalk-cdn.com/20180412/014997351654d8781fae8ce9534403f7.jpg)
All installed, will be interesting to see if This cooler makes any difference to EGT. They claim 22% bigger 33% more efficient.
![Image](https://uploads.tapatalk-cdn.com/20180412/008cbd2bcd3ee873d710495b37d25ec1.jpg)
Sent from my iPhone using Tapatalk