telliscope wrote:Ended up fitting the focal integration ibus 2.1 amp /sub also. Plug and play with an ISO adapter harness from the head unit. Front speakers run off the amp, and the sub fills the bottom end nicely. fits perfect under the passenger front seat.
mpk200 wrote:I don't suppose anyone has a ' how to remove the door panels' on my 2016 sr5?
Hi guys, I have ordered the Focal Sub, Toyota door speakers and IOS adapters. My question is with wiring. Is the sub with the IOS adaptors (including powering the front speakers) all plug and play? Is it just one set of wires that are run from under the seat to the rear of the head unit?telliscope wrote:Ended up fitting the focal integration ibus 2.1 amp /sub also. Plug and play with an ISO adapter harness from the head unit. Front speakers run off the amp, and the sub fills the bottom end nicely. fits perfect under the passenger front seat.
RustyCat wrote:Toyzx, any exceptions to that rule?
I am adding a Pioneer micro amp GMD1004. 4x 45 rms. thing wants 15amps. And I have the harness adapters ( OEM head to iso, iso to amp: then amp out to iso then to oem loom. )
I was hoping not to have to cut the factory or pioneer harness. But maybe I will have to if I need power direct from battery.
I am running power direct from battey to powered Kicker hideaway sub located behind rear seat anyway. ( which fits pretty well perfectly btw)
Any advice?
RustyCat wrote:Akroehn
Do the focals have a seperate crossover? If so where di u place it?
RustyCat wrote:Telliscope
Does your focal ibis 2.1 take power from harness adapters or have you wired up to a seperate power source. Want power does the amp need?
Users browsing this forum: No registered users and 2 guests