Just a summary of my OEM cruise control experience
2011 Toyota Hilux SR Dual Cab 3.0l Diesel Manual (Australia)
With reference to the following links:
http://www.tuningconcepts.com/Cars/Hilu ... iagram.pdfhttp://www.moranbahweather.com/toyota/h ... CC-1KD.pdfClutch switch present.
Brake has dual switch.
Tested ECM terminal E5-21(Green wire white stripe) for voltage - OK
Tested ECM terminal E7-7 (Brown wire) for earth - OK
Purchased cruise control stalk from aliexpress AU$26.
Installed stalk plugged into existing connector behind steering pad. Remember to disconnect battery.
Road test - No Good.
Tested continuity between red wire on stalk and E5-21 - OK
Tested continuity between black wire on stalk and E7-7 - No Good
Tested continuity between black wire on stalk and power socket body earth - No good
Tested Ohm readings on stalk as per
http://www.moranbahweather.com/toyota/h ... s04dx.html - OK
Tested continuity between black wire on stalk and white wire with black stripe on spiral cable connector - OK
Spliced wire(soldered) between white wire with black stripe and upper stud on fuse box approximately 250mm long with ring connector. Taped connection and wire to existing loom.
Road test - cruise control fully functional but no dash light.
Happy Camper