not a great deal has hapened with the hilux recently, stil waiting for my front mount to turn up and i got the gear together to do a full egr/maf clean at the same time.
i also painted the shed floor in jotacote which came up well
my latest project has been a camper trailer build
started with my cheap 6x4 box trailer,my quad fits snug in it so it seemed like a good base
![Image](http://i.imgur.com/U1tSYIYl.jpg)
i then cut out the corners and welded in some 50x50 shs steel that id welded some stainless nuts to
![Image](http://i.imgur.com/jDGhzCrl.jpg)
![Image](http://i.imgur.com/BiRrZcNl.jpg)
i then built a box to sit in them, its 40x40x3mm shs and is probably a bit overkill but its definately not going to break in a hurry. My roof top tent will mount on this
![Image](http://i.imgur.com/fKAhsBfl.jpg)
![Image](http://i.imgur.com/UpjO1hcl.jpg)
fully tig welded, which im finally getting the hang of. i now only foul up the tip 10 times a session
![Image](http://i.imgur.com/uLLltacl.jpg)
tomorrow my neighbours coming over with his forklift to hep me flip it then ill be cutting off the slipper springs and mounting the independent setup i bought
![Image](http://i.imgur.com/OehfSNYl.jpg)
ive got a heap of angle iron and bracing to strenthen it up as the box trailer is only sub framed in 25x25x1.6mm. im also going replace the drawbar and lengthen it as its a bit short atm
I also knocked together a new work bench as you can never have enough bench space
![Image](http://i.imgur.com/K85ZxIql.jpg)
thast it for now, should hopefully have it all together next week