by kyle300exc on Mon, 16 Jun 2014 3:53 +0000
ARB sell a generic kit off the shelf for $75 or better with trade. Comes with push fittings and 4 ports in the breather with plugs if they're not all needed. Its 8ml ID hose, on the cruiser it slid straight over the existing diff breather tail piece. Best to give the brass fitting a bit of heat with a lighter prior to sliding the hose on just so it molds to shape and forms a better seal. If your Hilux fitting is smaller tail as with the Patrol you'll need a 1/8bsb with a 6ml barb.
I can't remember the size of the gearbox breather but small plastic joiners are available from Repco to connect to the existing tube once the breather is cut off, then continue on to your breather.
Kyle
Never, under any circumstances, take a sleeping pill and a laxative on the same night.