Flywheel Bolts:
Torque:
178 N*m{ 1,815 kgf*cm , 132 ft.*lbf } for 1KD-FTV, 2KD-FTV
83 N*m{ 846 kgf*cm , 61 ft.*lbf } for 1GR-FE
INSTALL CLUTCH COVER ASSEMBLY
Align the matchmarks on the clutch cover and flywheel.
Tighten the 6 bolts as described below.
Determine the first bolt to be tightened by choosing the bolt closest to the knock pin.
Uniformly tighten the 6 bolts in diametrically opposite pairs relative to the position of the first bolt. Use the illustration as a reference.
Torque:
19 N*m{ 195 kgf*cm , 14 in.*lbf }
Lightly move SST up and down, and right and left.
SST
09301-00110
Check that the disc is in the center, and then tighten the bolts.