after a few weeks getting the airbags right they are finally in and work to what i wanted
image bellow of how much room there was for the airbag
the airbag it self
i dont have any pictures of the bag itself in as i cant really fit underneath it anymore
the bags give me about 2 inches of lift when i pump them up and each bag is rated at 500kg
i think if i get something heavy and trial how much the suspension travels i might lower the back another inch with blocks
second thing to do is to fit a kicker/kenwood stereo
RS series splits which ill mount on the a-pillar
12 in 2ohm CVT sub
kicker 350.4 4 channel
kicker 400.1 mono
going to dynamat absolutly everything back wall, floor and double layer the door.
ill ask all the stereo people on here
i can bi amp the splits to the cross over using all the channels of the amp
utilising the fader on the head unit as i can then change the levels to the tweeters mids easily
is this worth it????
eventually im going to build a custom box and port it for the sub to use up all the space behind the back seat
but the little box will do for the time being......
next is the fit an ARB compressor that feeds to a tank which will supply a dual control airbag swtich and outlets on either side of the car and one inside to keep it always clean...
last pic is a night after work all polished and clean.