Smart Gauge for 2005/2006 Hilux

[9W6VX]

Glad you like my list so much!

P0093 is for fuel system leak detected. I had the same error code too and cleared it.

P1306 Kickdown Relay Pull - In Circuit Fault
Not sure if it is correct though.
Googled from:
http://www.yotatech.com/f128/obdii-trouble-codes-76363/

[Steve9R]

still waiting for mine to arrive ..

[9W6VX]

Patience my fellow Luxian .........

[tasibrett]

P0093 is for fuel system leak detected. I had the same error code too and cleared it.

P1306 Kickdown Relay Pull - In Circuit Fault

Thanks for looking, , It bugged me what they were but I am under the pump . I cleared them and they have not come back after a short trip to the school bus.
Why does it always happen, you get a new toy and there's no time to play?

[9W6VX]

[9W6VX]

Steve,

Has yours arrived yet mate?

[Steve9R]

yeah mine arrived last week.. all working fine.. interesting to watch the TBP.. highest its been was 14.1psi ..

had to adjust the ECT value though.. i kept hitting 90c whilst 4wding on the weekend.. so had to change the alarm up to 95c.. working well though.. very impressed..

thanks again
Steve

[9W6VX]

No worries mate.

My ECT can hit up to 100c while pushing hard up a hill.
My ECT alarm is set at 95c.

Normally running 86 to 88c.

[Steve9R]

nah.. havent seen it that high.. highest i saw mine was 91c..

other thing i was impressed / surprised at was that i had no error codes in the ECU... that can only be a good thing!

Steve

[Steve9R]

Also.. to save me having to answer all the PM's ive been getting.. we purchased ours from here :

http://smartgauge.ecrater.com/

Thanks again to Brendon for sourcing them..

Steve

[OFFTRAK]

Waiting to receive mine. Really good communication from the Smart Gauge dudes, so far.

How have you guys mounted your Smart Gauge, same as Brendon?

[Steve9R]

nah.. ive got mine on the steering console. it blocks the trip meter, but i dont care..

Steve

[9W6VX]

Also.. to save me having to answer all the PM's ive been getting.. we purchased ours from here :

http://smartgauge.ecrater.com/

Thanks again to Brendon for sourcing them..

Steve

No worries mate.
We share .............

[9W6VX]

BTW, Steve what's your FTM temperature?

Your 1KD engines get a fuel cooler whereas my 2KD engines don't have it.

My FTM temperatures can go above 100c easily.

[OFFTRAK]

Your 1KD engines get a fuel cooler whereas my 2KD engines don't have it.

Ohhh, is that the horizontally mounted radiator looking thing under the back of my ute? I was thinking how stupid it was, as it has obviously been hit by rocks.

[9W6VX]

Yeah, that's about right Randal.

It has no guard to protect it.

[Steve9R]

yeah.. my FTM was around the 137 mark today.. what sorta figures you getting ?

[9W6VX]

Around that figure too mate 130++c

Thought your FTM would be lower since you have a fuel cooler standard.

[OFFTRAK]

G'day Guys

I received mine today. It came with a stand, although it's a bit chunky, unlike the one Brendon has.

I plugged it in with the car off and everything lit up "Looking for ECU" and then nothing. Turned on the car, expecting it to turn on after a couple of seconds like my ScanGaugeII in my other ute, but no dice.
Should I be doing something to initialise it?

Thank you.

[Steve9R]

mine didnt come with a stand...

not that i'd use it anyway..

umm when i got mine.. i simply plugged it in, and turned key to ignition.. it searching and found ECU and gave the menu to read codes / clear codes etc..

what year / build is your lux ?

Steve