by ssdsibes on Thu, 30 Jun 2011 5:41 +0000
In hindsight I should have gone external sensors, but as I have a Polaris headunit, it has tyre pressure monitoring built in and I bought their kit which have sensors installed inside the tyre and this meant not having an additional screen to look at.
It works well, but the tyre place did not install my sensors well, after advising they were experts at doing this, and now 2 are stuffed as the sensor mounting nut unscrewed and the sensors floated around inside the tyre whilst driving.
In the process of doing a Fair Trading claim as the tyre place said basically piss off, we don't warrant our ability to do up bolts, WTF.
If you go internal I would definitely be putting a low strength lock tight on the mounting screws, but hindsight is a good thing. The Polaris manual didn't state this and tyre shop didn't do it either.
Wish I had gone the same way as Warren and got a Tyredog setup
Sam