coil sas kit for old lux's

[3dhilux]

http://www.outerlimits4x4.com/viewtopic ... 6&t=220608
if i did need abs i would consider this

[Hilux Max]

Yep,

Thats Buddies fine work there......once I start on the old 88 shitter, Id love to convert the front and rear to coils.....

Good on ya Buddy for always upping the bar!

[Jack S]

are you able to post some pictures on this forum?
I am unable to get onto outers

[3dhilux]

Finally there is a Coil Front SAS kit available for 1986 - 2005 IFS Hilux & 4 Runners, we have have these kits fitted to customers vehicles for in excess of 12 months now and are ready to release to the public as a 1 stop kit. Out side of this kit you will require 1 complete long gusset Hilux front axle assembly, 1 pair of 80 series radius arms, 1 pair of 80 series front bump stops and 1 pair of 60 series steering arms.

The kit includes:

1 x Front Housing with mounts*
1 x Drivers Side Outer Chassis Plate
1 x Drivers Side Inner Chassis Plate
1 x Passenger Side Outer Chassis Plate
1 x Panhard Chassis Mount
2 x Upper Coil Hats
2 x Upper Shock Towers
2 x Radius Arm Chassis Mounts
3 x Crush Tubes & Bolts For Steering Box
1 x Steering Shaft Extension
1 x Panhard
2 x Panhard Bushes
2 x Panhard Bolts
4 x Lower Radius Arm Bushes - Genuine Nissan
2 x Upper Radius Arm Bushes - Genuine Toyota
4 x Lower Radius Arm Bolts
2 x Upper Radius Arm Bolts
1 x 30mm Solid Tie Rod With TRE's
1 x 30mm Solid Drag Link With TRE's
1 x Flat Pitman Arm
2 x DOT Approved Braided Lines
2 x 10" Fox Shocks Emulsion Shocks**
2 x Upper Shock Bolts
2 x Lower Shock Bolts
2 x Coils***
2 x Brake Rotors
2 x IFS Hub Spacer Kit
1 x Knuckle Service Kit
2 x Wheel Bearing Kits

*Has Radius Arm Mounts, Coil Mounts, Shock Mounts & Panhard Mounts welded on in our jig. We will require a straight long gusset housing from you to weld out mounts to.
** Remote Reservoir + $240
*** 3" lift - From bottom of chassis at gearbox to centre of axle ~160mm

PRICE AND PRICE CONDITIONS:
$3495 + Freight

CONDITION:
New

REASON FOR SELLING:
N/A

EXTRA INFO:
Ask us about our heavy duty front housings as an option instead of using the original toyota housing.

LOCATION:
Woodridge, Qld 4114

Opening hours:
Monday: Friday 5pm - 9pm
Saturday: 10 am - 4 pm

CONTACT:
Ph: 0417 708 598
Email: sales@budscustoms.com.au
PM
i dont no how to get there picture's

[Hilux Max]

[eMOJO]

That's pretty good value... I would prefer links though but not sure on the legalities and that my be why Buddy is offering it as a radius arm setup. Sitll more coin than a decent leaf SAS for similar flex but I imagine the on-road manners would be better with the coils