Bartso's Custom Hilux build new pics 03/02

[Bartso]

The project got put on hold for a little while due to no paperwork being submitted to the DOT which I thought was already done, so I redone all the paperwork and got the reply from DOT on Friday saying its all good!!!! To go ahead it will be classed as an ICV,
Work will commence next weekend

[Hilux Max]

bump?

[Bartso]

lol i know nothing further has been done due to reno's around the house im hoping to clean the shed up this weekend then i can get back into it

[Bartso]

here is the gearbox cross member the arm and old engine mount are bolted in there cause the welds are cooling



this is the drive shaft i will be using front and rear its from my old comp rig they just need to be lengthened



here is the ls1 sitting in the bay engine should be mounted up this weekend

[MarkYounger]

Nice

[Andy02lux]

whats a ICV class vehicle?

[Parr]

That LS looks right at home in there

whats a ICV class vehicle?

Individually Constructed Vehicle
basically a bitsa, like a hot rod.

[Bartso]

That LS looks right at home in there

whats a ICV class vehicle?

Individually Constructed Vehicle
basically a bitsa, like a hot rod.

Yeah it actually a lot tighter than what the photo's show steering column will be very close to the headers so they will prob be a custom set

[Parr]

whats the width of the 80 chassis like compared to the luxes? would it be i tighter fit on a standard chassis?

[Bartso]

Chassis width isn't an issue with the ls1 it's the hilux body especially the transmission tunnel, and it's not a case of simply lowering the transmission cause the Ls sump hits on the diff housing, I have got the shallowest sump of the shelf for the ls

[Boof]

Need to come around and check this out in person, before you pull the pin on it

[Bartso]

Haha, I'm home all over Christmas mate not pulling the pin on this just have a couple of mounts to fab up modify the rear of the chassis and do new suspension mounts to get the gu diffs under it

[Boof]

Holden motor, Nissan doffs, pfft you still have a lot to learn
I'll bring a case over and we can catch up

[Bartso]

Holden motor, Nissan doffs, pfft you still have a lot to learn
I'll bring a case over and we can catch up

Lol trust me I would of loved to keep the 80 diffs it would be a lot easier but I wanted more width without having offset and all the issues with bigger offset prob would of been easier with an 1uz too (smaller gearbox)

[Bartso]

ok rear diff is in only thing left to do is make shock tabs which i'll do once they arrive from the states




made a new panhard bracket for the front diff all im waiting for is the custom super flex arms from superior

[Hilux Max]

bumping this thread for others to read and any updates?

[amitch888]

Bump... Any updates?

[Web-eng]

An old thread I know but did this ever get finished???

[Web-eng]

Anyone know anything about this or what the outcome is?
Finished, still being built, parted out???

[jayden121212]

Bloody oath read all this for it to not even get finished.. smh