Geez Max, they are a bit noisier but didn't think you'd hear them down there. You must be psychic!
Finally got a chance to see Ryano today and Bugger me! Like a magician out of a hat, he pulled out a set of Dick Cepek Crushers on Speedy Prado RIms in a +20 offset. Size 265/75 R16 or exactly 32"
These are the first set of Crushers fitted to a fourby in Australia and they look pretty awesome
There is plenty of clearance at the mudflap
but on full lock, there is just enough clearance (barely 5mm) from the upper control arm. Hard to show in a pic but the spot they will rub is in front roughly level with the front edge of the spring. don't you love the skulls on the sidebiters!
I could have some 33's on 285/85 R16's but Ryano was not keen on recommending the larger tyre. I'd say it would have been too much for the rims at this offset and you would have clearance issues without aftermarket UCA's. i reckon these will be fine for me.
I am sworn to secrecy on the price I paid for these and a big thanks to Max for emailing me the link on Outers where Ryano was asking for people to trial the new DC tyres. He had 2 sets of Crushers and 2 sets of the new DC MT's in as a special order and he get them out there at cost. Anyway after a really good deal on my existing tyres and rims, the changeover was probably no more than the cost of the rubber I ave consumed driving on my current tyres.
at this stage there are no plans to bring any more in by the dstributor, but Fourbys are working hard to get them to change their mind so if you want to register your interest look up
http://www.fourbys.com.au and give Ryan a call.
Because I have only had them on an hour so, I can't tell you much about hem. surprisingly quiet, not mch worse than my current tyres and not a whine like Swampers or Boggers, just a bit louder version of my current AT's. Got out on the highway briefly at 100k's and it ;looks like they are reading 103km at 100 and 61 at 60 km. Friday of a long weekend s not a good day to be testing tyres on a 2km stretch of tollroad I can get on wtout paying a toll.
Oh and I thnk Twisty might be
with envy. Ryano could not stop himself and emailed some pics of my rig he took in the shop
anyway looking forward to getting out and dropping the pressure down to 10-12 psi