NewHilux.net

by **jameslux** on Sat, 24 Jul 2010 6:57 +0000

Can anyone post some pics or tell me how to remove the dash. I want to replace the radio with a UHF and single din radio.

Thanks
James

by **OFFTRAK** on Sat, 24 Jul 2010 7:48 +0000

Thanks to efini7... CLICK ME

by **jameslux** on Sat, 24 Jul 2010 11:54 +0000

Thanks. How do you get the rest of the dash out?

by **OFFTRAK** on Sat, 24 Jul 2010 6:21 +0000

Why do you need the rest of the dash out, James?
Pulling out the glovebox (squeeze in the sides so the stoppers dislocate, pull forward and as the glovebox drops it will come away from the locaters at the base) will give you access to much of the left hand side under the dash. Plenty of room for running your UHF aerial cable etc.

Cheers
Randal

by **jameslux** on Sat, 31 Jul 2010 7:08 +0000

Thanks Randal. Thats all I will need to take off for the UHF cables.

by **Doogs** on Thu, 07 Oct 2010 6:39 +0000

if you pull your fan speed dial ( & the other 2 as well ) off there is a screw in behind it, undo the screw & that allows you to pull the shroud off around the radio etc which gives you more access as well.
Doogs

by **oldlux96** on Sat, 06 Apr 2013 8:36 +0000

Opening an older one..

Anyone know if its easy to remove the ashtray from an SR5 for a UHF install??

by **Litlbalt** on Mon, 08 Apr 2013 7:44 +0000

Glad you asked

, i have sat staring at mine for far to long, been getting the guts to have a crack but I normally only figure stuff out as I break things

by **oldlux96** on Wed, 10 Apr 2013 10:47 +0000

Saw a thread elsewhere here. Looks like it's hard. You can see the screws at the front of the tray behind the face of the dash. looks like you have to pull the whole thing off..

Was going to install the UHF there, but have found a good space on drives side foot-well. Will be posting picks on the install on a different thread regarding UHF installs.. \
Cheers

by **mut59** on Thu, 11 Apr 2013 8:23 +0000

After you remove the screws there are still 2 plastic tabs keeping it all in place on both sides. If you don't mind cutting these off the whole thing should slide out. There's not much in the way of mounting points in there. Even the small Oricom I bought needs the whole lot out as it wont quite fit in where the ash tray slides out from. It looks quite neat in there though. I want to add a bit of reinforcing into the plastic strip where I finally put the screws in as well. I also didn't want to drill into the dash so removed the small clip on panel to the left of the ash tray and mounted my hand piece there. That way if I do change cars (After spending a fortune on this one) I can hide the holes. I'm glad to know that I'm not the only one with these ideas.

by **Stu.wrf450** on Thu, 16 May 2013 9:03 +0000

How do yo remove the instrument panel that has the 12v sockets in it? Want to connect one to the second battery..

by **petejohnson2242** on Thu, 16 May 2013 9:42 +0000

Go to supercheap auto and buy the gregorys manual it has step by step instructions and pictures on how to dismantle your whole rig including the dash

by **hilder91** on Thu, 16 May 2013 2:52 +0000

a chainsaw usually does the trick :lol:

NewHilux.net

How To Remove Dash

Re: How To Remove Dash

Re: How To Remove Dash

Re: How To Remove Dash

Re: How To Remove Dash

Re: How To Remove Dash

Re: How To Remove Dash

Re: How To Remove Dash

Re: How To Remove Dash

Re: How To Remove Dash

Re: How To Remove Dash

Re: How To Remove Dash

Re: How To Remove Dash