MrLuxx wrote:Hi guys I'm currently fitting a Redarc BCDC1220 and was wondering of anyone can help me
With finding the easiest spot to splice the blue ( ignition voltage sense ) wire would be?
Thanks in advance Pat
Steveyb wrote:MrLuxx wrote:Hi guys I'm currently fitting a Redarc BCDC1220 and was wondering of anyone can help me
With finding the easiest spot to splice the blue ( ignition voltage sense ) wire would be?
Thanks in advance Pat
Hey mate, the blue wire goes to the battery positive when setting it up on a 12v system (it is measuring voltage level to know when/what to do about charging) it only goes to an ignition point on a 24 volt system.
EDIT:!!!! the positive on the feed battery (starter battery)
read here:
http://redarc.com.au/static/files/Spec_ ... t-A5-2.pdf
Hilux Max wrote:Has anybody fitted a 2nd battery in the tub of their hilux and if so what sort of setup did you go with?
i.e. battery box, inside another tool box, on top of rear wheel arch etc....
Im looking for ideas.
Hilux Max wrote:So the battery box was bolted through the floor and you ran the wiring through the rear tail light to the front?
Hilux Max wrote:Has anybody fitted a 2nd battery in the tub of their hilux and if so what sort of setup did you go with?
i.e. battery box, inside another tool box, on top of rear wheel arch etc....
Im looking for ideas.
buffo69 wrote:My Ctek is mounted under the passenger seat.
PluckA76 wrote:Jut bought the 20amp ctek dual dc-dc charger. Has anyone got photos of where they installed them under the bonnet. I'm thinking of velcroing it ontop of the fuse box which sits central to the two batteries.
Users browsing this forum: No registered users and 14 guests