by Squid_87 on Sun, 30 Aug 2009 5:32 +0000
Well something has gone pear shaped over night. Yesterday afternoon I put the lux up on stands, removed the rear wheels, soaked the wheel studs and the inner ring closest to the outershaft of the axle housing (the one exposed through the rim) with WD40. Tried removing the drums with belting the face with a hammer. No luck which is when I packed up and put the wheels back on and posted above. Parked the ute on the driveway yesterday evening, engage the handbrake and the lux rolls through it. Parked it in first gear, no dramas. Working on the ute all afternoon in the canopy on level ground, go to park the ute on the driveway this evening, first gear again. Ute sits there for a second, then theres a series of clunks then the vehicle jerks about 3-4 inches down the drive, first gear bites again, clunks then the vehicle jerks again and so on. During this, the lux is in first gear, handbrake is on even thou its not biting at the moment, and no pedals are being touched. Would anybody know what the problem is?
Thanks in advance,
Luke
Cheers,
Luke
08/05 SR single cab, heavy duty steel tray, steel canopy with vinyl sides and mozzie net, Dobinsons 2in lift, ECB big tube alloy bar, Nitestalker 100w spotlights, 55w under tray reverse spotlights, 31x10.5 Maxxis Bighorns on 15x7 Sunraysias