by Myralga on Sun, 18 Mar 2018 8:01 +0000
I’m with toyzx here.
I don’t see a single under panel (there should be 4)
Fog light inserts are missing.
No pictures of any of the mounting hardware
The top eyebrow molds are heat stressed and warped.
Here is a helpful hint in all likely hood you are missing something major.
And most arb stores will warm you that buying every individual part by part gets super expensive super quick. (Those fog light parts are around $100 alone without the lights which are another $100ish)
You can purchase a full fit fit which is your cheapest option usually. Generally speaking looking at $500-600 for the fit kit. And be prepared to wait you could be sitting around looking at a bar that you can’t fit for a couple months waiting on the fit kit to turn up.
Then there is the matter that this bar has been pre-pinned to a different chassis. So when you go to mount it up your pinning Point is likely going to be different. This means you may be drilling a very close hole to pin the bar. If it’s really close could mean you now have a elongated hole rather then a pinning hole. End result the bar will move in an impact.
Be warned ebay finds are not always what you expect. These are a technical product and need to be done right. Installed incorrectly and something horrible happens you are liable as the fitter.
Sent from my iPhone using Tapatalk