olcoolone wrote:---------------------------------------------------
If you were to use a standard mini 5 pin 20-40 amp relay.
Make sure the relay is not a change over type.
Make sure terminal 87 and 87a are joined when relay is switched.
Terminal 85 - RED wire with YELLOW trace from back of headlight.
Terminal 86 - RED or BLACK wire from back of headlight.
Terminal 87 – To positive wire on first auxiliary light/s.
Terminal 87a - To positive wire on second auxiliary light/s.
Terminal 30 – From battery positive terminal via a 20 amp fuse.
Squid_87 wrote:Just sidetracking from Steve's dilemma for a second. My ute came prewired with a pair of Nite Stalker 100w on the front. They work without any problems. Only dilemma is that its wired in a way that when the high beams are on, so are the spotties; theres no switch in the circuit. I was wondering which wire do I tap in to put a rocker switch in and how do I go about it.
Thanks,
Luke
Users browsing this forum: No registered users and 26 guests