Cabin Guard removal for Canopy install

Cabin Guard removal for Canopy install

Postby aj-vegas on Mon, 28 Oct 2024 2:54 +0000

Hi guys,

I’ve just picked up a canopy for my N70 (2009 SR Dual Cab), and I know that I’ll need to remove the cabin guard (the bars behind the rear window) to install it. I’ve only found suggestions to cut it off with an angle grinder, but I’m wondering if that’s the only option? Is it possible to unbolt it somehow?

For example, if the whole tub was removed from the ute, could you unbolt it easily then, or is it welded and angle grinding really is the only way?

Cheers!
aj-vegas
 
Posts: 6
Joined: Thu, 13 Jul 2023 8:32 +0000
Location: Central Coast


 

Re: Cabin Guard removal for Canopy install

Postby Rob_Wood on Mon, 28 Oct 2024 6:12 +0000

If you look down below where the "legs" go into the top of the tub, you'll see the spot weld points. Theoretically you could drill out the spotwelds and weld up the holes and refinish those points, but most people just choose the angle grinder option.
Rob_Wood
 
Posts: 981
Joined: Mon, 21 Sep 2020 8:32 +0000
Location: NSW

Re: Cabin Guard removal for Canopy install

Postby 241steve on Tue, 29 Oct 2024 4:28 +0000

the legs are welded to the top of the tray angle grinder is the easiest way to get them off, its not hard no sparks on the glass cover up.
241steve
 
Posts: 176
Joined: Thu, 03 Dec 2020 11:32 +0000
Location: morwell victoria

Re: Cabin Guard removal for Canopy install

Postby aj-vegas on Tue, 29 Oct 2024 5:26 +0000

Okay thanks guys
aj-vegas
 
Posts: 6
Joined: Thu, 13 Jul 2023 8:32 +0000
Location: Central Coast

Re: Cabin Guard removal for Canopy install

Postby walledroof on Tue, 29 Oct 2024 8:07 +0000

Had the same dilemma, ended up being easier than expected with the grinder.
walledroof
 
Posts: 10
Joined: Thu, 24 Oct 2024 9:39 +0000
Location: Australia


Return to Tips & Tricks

Who is online

Users browsing this forum: No registered users and 0 guests