dave g wrote:I can't see it moving with the bonnet it will hit the windscreen it would be good to see a photo with the bonnet open
bcs0228 wrote:Definitely a bonnet mount. You undo the two bolts holding the bonnet to the hinge and then reassemble with the UHF bracket sitting between the hinge and the head of the bolt. The bracket is 5mm thick and according to GMF the factory bolts are long enough to accomodate the thickness of the bracket.
RougeBY2 wrote:I have this setup on my 2022 rogue the only problem I have is that I need to move the antenna forward to lift the window wiper. I have no problem opening the bonnet etc.
regards
Martin
RougeBY2 wrote:I have this setup on my 2022 rogue the only problem I have is that I need to move the antenna forward to lift the window wiper. I have no problem opening the bonnet etc.
regards
Martin
bcs0228 wrote:Hi Rob,
If you’re referring to the first photo, that was taken before I fitted the aerial or cable. What looks like cable in that photo is actually the hose to the windscreen washer.
Users browsing this forum: No registered users and 2 guests