Lifting front only (25mm) due to heavy bullbar/winch SOLVED

Lifting front only (25mm) due to heavy bullbar/winch SOLVED

Postby SteveD1984 on Fri, 29 Apr 2022 1:53 +0000

I have stock suspension. I don't need a lift kit, I just want to raise front back up to normal height. I have steel ARB bullbar and winch. Suspension shop tells me it's sitting 25-30mm lower than it should be. How can I raise this up 25mm safely without spending too much. From what I understand, using a heavy spring will work, but may cause issues with factory shock. Can I just put a new set of struts in the front with heavier duty springs? If so, what do you recommend?

Going to discuss with suspension shop next week, just want some advice before I go in there if I can.

Tires are 265/70R16

Image
Last edited by SteveD1984 on Mon, 06 Jun 2022 10:20 +0000, edited 1 time in total.
SteveD1984
 
Posts: 33
Joined: Sun, 20 Mar 2022 2:08 +0000
Location: Perth WA


 

Re: Lifting front only (25mm) due to heavy bullbar & winch P

Postby Rob_Wood on Fri, 29 Apr 2022 8:07 +0000

SteveD1984 wrote:I have stock suspension. I don't need a lift kit, I just want to raise front back up to normal height. I have steel ARB bullbar and winch. Suspension shop tells me it's sitting 25-30mm lower than it should be. How can I raise this up 25mm safely without spending too much. From what I understand, using a heavy spring will work, but may cause issues with factory shock. Can I just put a new set of struts in the front with heavier duty springs? If so, what do you recommend?

Going to discuss with suspension shop next week, just want some advice before I go in there if I can.

Tires are 265/70R16

Image


If you're just trying to re-level the vehicle because you've added weight, you don't need a lift per-se, you are more likely to just need slightly heavier duty springs. Maybe shocks as well. I'd suggest take it to a suspension specialist (Pedders, Ironman, numerous others) and get their opinion. Maybe even shop around a little before you spend the coin.
Rob_Wood
 
Posts: 856
Joined: Mon, 21 Sep 2020 8:32 +0000
Location: NSW

Re: Lifting front only (25mm) due to heavy bullbar & winch P

Postby SteveD1984 on Sat, 30 Apr 2022 3:12 +0000

I really just wanted to know if I will break any part of the strut by just upgrading to a stronger spring. The spring I am looking at is 30% stronger than the original and will just lift the front of my vehicle back to stock height, which is all I need.

I've head of parts of struts breaking from strut spacers and heavier springs, but not sure if thats a myth or not.
SteveD1984
 
Posts: 33
Joined: Sun, 20 Mar 2022 2:08 +0000
Location: Perth WA

Re: Lifting front only (25mm) due to heavy bullbar & winch P

Postby Rob_Wood on Sat, 30 Apr 2022 6:37 +0000

SteveD1984 wrote:I really just wanted to know if I will break any part of the strut by just upgrading to a stronger spring. The spring I am looking at is 30% stronger than the original and will just lift the front of my vehicle back to stock height, which is all I need.

I've head of parts of struts breaking from strut spacers and heavier springs, but not sure if thats a myth or not.


I'd suggest take it to a suspension specialist (Pedders, Ironman, numerous others) and get their opinion. Maybe even shop around a little before you spend the coin.
You should be able to get answers to your questions without spending any money.
Rob_Wood
 
Posts: 856
Joined: Mon, 21 Sep 2020 8:32 +0000
Location: NSW

Re: Lifting front only (25mm) due to heavy bullbar & winch P

Postby dave g on Sat, 30 Apr 2022 8:20 +0000

Breaking because of spacers YES
Breaking because of heavier springs no
Still go heavier springs to carry the weight no reason to change struts your not changing the ride height
( unless the struts are stuffed )
dave g
 
Posts: 715
Joined: Fri, 18 Oct 2013 6:59 +0000

Re: Lifting front only (25mm) due to heavy bullbar & winch P

Postby Rob_Wood on Sat, 30 Apr 2022 10:17 +0000

dave g wrote:Breaking because of spacers YES
Breaking because of heavier springs no
Still go heavier springs to carry the weight no reason to change struts your not changing the ride height
( unless the struts are stuffed )


Thanks Dave, that might prevent him from needing to go to a suspension joint.
Rob_Wood
 
Posts: 856
Joined: Mon, 21 Sep 2020 8:32 +0000
Location: NSW

Re: Lifting front only (25mm) due to heavy bullbar & winch P

Postby Gipsy on Sun, 01 May 2022 8:13 +0000

X2 stronger springs will not break the strut... Spacers almost certainly will... And spacers will break the bank if you get caught! ;)
Spacers just compress the spring to make it more stiff (whilst also reducing travel) but heavier springs extend the height in a controlled way. Just a guess but if you put a standard spring next to a stiffer (stronger) spring the stronger spring will be a different length (longer).
Cheers Gipsy :D although I'm sure somebody will challenge that :lol: even Einstein wasn't certain of his theories.
My 2013 auto D4D DC SR5, prefilter, 3" exhaust and Chip with egt probe, stock SR5 rims with Toyo Open Country AT2 265/65R/17's
Gipsy
 
Posts: 2135
Joined: Tue, 07 May 2013 2:00 +0000
Location: South Coast NSW and all over Oz

Lifting front only (25mm) due to heavy bullbar (which spring

Postby SteveD1984 on Fri, 06 May 2022 12:54 +0000

Ok so stronger strings in the front will do what I need. Can anyone recommend an exact spring for the front? I've got an ARB bullbar and a winch. All I want to do is get the front back up to the original height. The previous owner added the bullbar and winch without changing the front springs. I'm keeping the rear stock as its plenty high enough.

My suspension shop does King Springs and said "The KTFS 101 is a standard height coil that is about 30% stronger that the factory coil. Given that you have additional accessories on the vehicle it will likely lift the front from where it is now but isn’t designed to go above the factory ride height (will still be nose down)"...is this spring the best option, or is there a more suitable spring?

EDIT: OK I understand these springs are available... can anyone tell me which one I should get? I'd like the ute to be level if possible, so the KTFS 101 (standard height) may be too low. Technically I can raise the front 20mm extra legally (already got bigger tires), so a spring that will raise it 20mm above stock that takes the weight of my bullbar and winch would be ideal, if that makes it level. Ute is single cab trayback.

KTFR 101 - free length 375mm, 17mm wire diameter, spring rate 660 lbs
KTFR 101H - 385mm, 17mm wire, 660 lbs
KTFR 101HD - 370mm, 18mm wire, 800 lbs
KTFR 101HHD - 390mm, 18mm wire, 800 lbs
SteveD1984
 
Posts: 33
Joined: Sun, 20 Mar 2022 2:08 +0000
Location: Perth WA

Re: Lifting front only (25mm) due to heavy bullbar & winch P

Postby hiluxxury on Fri, 06 May 2022 5:42 +0000

800lbs for a steel bar and winch.

The 370mm spring above may give you some lift. If your struts are old, it might be worth getting new struts that are high adjustable so you can tune the height.

I'm going through the same process now for my ranger - I dont want lift but the front end is sagging and the shocks are old. I'll probably go with the dobinson mmr without the external reservoir.
I might be wrong.

2005 SR Hilux 1KD - SOLD
2009 BMW X5 - destroyed by a hail storm
2012 Range Rover Sport SDV6 - SOLD
2015 Ford Ranger
User avatar
hiluxxury
Moderator
 
Posts: 1584
Joined: Sun, 20 Dec 2009 4:16 +0000
Location: Tasmania

Re: Lifting front only (25mm) due to heavy bullbar & winch P

Postby dave g on Sat, 07 May 2022 8:24 +0000

Rob_Wood wrote:
dave g wrote:Breaking because of spacers YES
Breaking because of heavier springs no
Still go heavier springs to carry the weight no reason to change struts your not changing the ride height
( unless the struts are stuffed )


Thanks Dave, that might prevent him from needing to go to a suspension joint.


Rob how does it stop he going to a suspension joint???? Or did I miss something
dave g
 
Posts: 715
Joined: Fri, 18 Oct 2013 6:59 +0000

Re: Lifting front only (25mm) due to heavy bullbar & winch P

Postby Rob_Wood on Sat, 07 May 2022 9:42 +0000

dave g wrote:
Rob_Wood wrote:
dave g wrote:Breaking because of spacers YES
Breaking because of heavier springs no
Still go heavier springs to carry the weight no reason to change struts your not changing the ride height
( unless the struts are stuffed )


Thanks Dave, that might prevent him from needing to go to a suspension joint.


Rob how does it stop he going to a suspension joint???? Or did I miss something


I was (and am) unclear to the knowledge levels and abilities of this individual and so I was not instantly assuming he "NEEDED" to go for help. At that point he had many options open to him ... Now his options may be reduced, but they remain multi-faceted.
Rob_Wood
 
Posts: 856
Joined: Mon, 21 Sep 2020 8:32 +0000
Location: NSW

Re: Lifting front only (25mm) due to heavy bullbar & winch P

Postby SteveD1984 on Mon, 06 Jun 2022 10:15 +0000

For anyone with this same problem, I ended up getting this fixed. I got Wilkinson suspension in Bayswayter (Perth) to do it, they are clearly experts in suspension and I would highly recommend them. The ute now looks totally level and handles considerably better. Didn't go for a lift kit because it would have been illegal.

Ended up getting
- King Springs KTFS101 (standard height front springs)
- Tough dog shocks front and rear
- Kept original rear springs

The vehicle height went back up to stock (approx 25-30mm higher) and the ute handles amazing, previously it was very squirrely and soft in the corners due to bullbar weight.
SteveD1984
 
Posts: 33
Joined: Sun, 20 Mar 2022 2:08 +0000
Location: Perth WA


Return to Suspension

Who is online

Users browsing this forum: No registered users and 2 guests