Hey guys,
To paint you a picture, I had some Fox 2.0 front struts fitted to my hilux roughly 2 years ago. I have always had issues with my cv’s so after a lot of looking about it seems that the shop that installed them wound the springs up far too much so that the car sat level, making the shock sit at a 3” height instead of the 2” that I wanted. The ride has always been ruff as guts so I decided to buy some new springs suited to the cars weight.
The shop lowered the seat height by 1” but this has made next to no difference in the height, so I’m asking anyone with Fox suspension with a progression spring rate what height is your shocks set at? I have a Xrox bar, 20” light bar and a winch on the front.
I know what the centre of hub to guard measurement is meant to be but that doesn’t help me when your paying a shop to adjust the height to the correct amount. If I could know what the measurement from the bottom of the tread to the coil seat that would be great!
Any help would be super appreciated.
Cheers, Josh