Hilux KUN26L build in USA

Want to show off what you've done to your rig? or have a custom project to show? Post it up here!

Re: Hilux KUN26L build in USA

Postby AmeriKUN26 on Tue, 21 Sep 2021 2:35 +0000

davo94 wrote:Are you doing the roof?


Not planning on it, A,B and C pillars though. The headliner is unobtanium here and I don't want to pull it, I have never done the roof on a deadener install. Do you find it worthwhile?
User avatar
AmeriKUN26
 
Posts: 164
Joined: Fri, 28 Feb 2020 12:19 +0000
Location: Florida USA


 

Re: Hilux KUN26L build in USA

Postby AmeriKUN26 on Wed, 22 Sep 2021 3:19 +0000

Making headway, removing components on the tunnel to put deadener underneath, also going to surround the shifter arms fairly snuggly. I should finish the deadener tonight, then it's time to clean the hell out of all the interior components and start reassembly.

Image

Image

Image
User avatar
AmeriKUN26
 
Posts: 164
Joined: Fri, 28 Feb 2020 12:19 +0000
Location: Florida USA

Re: Hilux KUN26L build in USA

Postby AmeriKUN26 on Thu, 23 Sep 2021 5:16 +0000

Finished the mat last night and got the carpet all cleaned up this morning, looks like new. Slowly cleaning and installing the interior trim. Should be done this evening for test drive and ready for the Escape Gear seat covers when they arrive in a month or two.

Image

Image

Image

Image
User avatar
AmeriKUN26
 
Posts: 164
Joined: Fri, 28 Feb 2020 12:19 +0000
Location: Florida USA

Re: Hilux KUN26L build in USA

Postby AmeriKUN26 on Fri, 24 Sep 2021 3:54 +0000

Got the interior cleaned up and back together, also replaced the steering column shaft seal. Applied some mat to the seal carrier, the difference overall is very noticeable. No road or exhaust sounds, just the diesel rattle which is also improved. Seat covers shipped today as well.

Image
User avatar
AmeriKUN26
 
Posts: 164
Joined: Fri, 28 Feb 2020 12:19 +0000
Location: Florida USA

Re: Hilux KUN26L build in USA

Postby Critter350 on Fri, 24 Sep 2021 8:46 +0000

Only viewing on my phone using Tapatalk.
All broken links still. Tapatalk keeps bugging me about upgrading to paid version, so maybe that’s the problem.


Sent from my iPhone using Tapatalk
Critter350
 
Posts: 521
Joined: Sun, 19 Mar 2017 9:36 +0000
Location: Rockingham WA

Re: Hilux KUN26L build in USA

Postby AmeriKUN26 on Fri, 24 Sep 2021 10:49 +0000

Critter350 wrote:Only viewing on my phone using Tapatalk.
All broken links still. Tapatalk keeps bugging me about upgrading to paid version, so maybe that’s the problem.


Sent from my iPhone using Tapatalk


Dang! If I figure anything out on this end I'll let you know.
User avatar
AmeriKUN26
 
Posts: 164
Joined: Fri, 28 Feb 2020 12:19 +0000
Location: Florida USA

Re: Hilux KUN26L build in USA

Postby Gipsy on Fri, 24 Sep 2021 1:13 +0000

Not your end as far as I can see... They're all visible for me.
Cheers Gipsy :D although I'm sure somebody will challenge that :lol: even Einstein wasn't certain of his theories.
My 2013 auto D4D DC SR5, prefilter, 3" exhaust and Chip with egt probe, stock SR5 rims with Toyo Open Country AT2 265/65R/17's
Gipsy
 
Posts: 2135
Joined: Tue, 07 May 2013 2:00 +0000
Location: South Coast NSW and all over Oz

Re: Hilux KUN26L build in USA

Postby AmeriKUN26 on Fri, 01 Oct 2021 6:58 +0000

Escape gear seat and console covers came in, the fit and finish is incredible.

Image

Image

Image

Image
User avatar
AmeriKUN26
 
Posts: 164
Joined: Fri, 28 Feb 2020 12:19 +0000
Location: Florida USA

Re: Hilux KUN26L build in USA

Postby AmeriKUN26 on Sat, 16 Oct 2021 6:28 +0000

Loving these seat covers! Not much to update, after some new wheels and tires. Having a rough time deciding on how much paint work to do, not trying to turn it into a show truck. Roof rack and paint will nearly finish it! Got it's first wash last weekend.

Image
User avatar
AmeriKUN26
 
Posts: 164
Joined: Fri, 28 Feb 2020 12:19 +0000
Location: Florida USA

Re: Hilux KUN26L build in USA

Postby feralbass on Sun, 17 Oct 2021 4:25 +0000

I love that cover over the console
Do that supply that separately?
Can you send me the link
Cheers, John
Work hard, party hard
feralbass
 
Posts: 6
Joined: Sat, 25 Aug 2018 5:07 +0000
Location: Werrington NSW

Re: Hilux KUN26L build in USA

Postby AmeriKUN26 on Mon, 18 Oct 2021 12:48 +0000

feralbass wrote:I love that cover over the console
Do that supply that separately?
Can you send me the link
Cheers, John


www.escapegear.com

Just enter all of your model information and select a material. The console lid cover is included with the seat covers. The console cover itself is separate. Construction quality is excellent.
User avatar
AmeriKUN26
 
Posts: 164
Joined: Fri, 28 Feb 2020 12:19 +0000
Location: Florida USA

Re: Hilux KUN26L build in USA

Postby aj_hilux on Fri, 08 Apr 2022 7:28 +0000

AmeriKUN26 wrote:SPC UCAs installed this morning, no problems. No more rubbing and I can get as much caster as I want. Also installed a .25" spacer on the LH side to combat the lean. Should actually be done with suspension after an alignment tomorrow. :D Sad to see that my brand new CV boots already have some cracking after a couple hundred miles... :roll:

Image

Image

Image

Brand new set of uppers if any of you want to pay for shipping! :lol:

Image


Hey mate, where did you buy the UCA's from? Are they a tacoma part and if so do you have the part no.?

My spc uca's have flogged out the pivot bushing on one side and I need to replace them, but shops in aus want $600 for the x axis bushing kit. I can see them in the US for around $200. Just not sure which ones to get. It seems these ones will fit the taco of the same year

https://www.toyteclifts.com/25022-spc-x ... 25480.html
aj_hilux
 
Posts: 1
Joined: Sun, 02 Oct 2016 6:05 +0000
Location: Victoria

Re: Hilux KUN26L build in USA

Postby CDNN70 on Wed, 13 Apr 2022 4:43 +0000

This is such an awesome build! I am in Canada and am currently on the hunt to try and find one I can import here. cool to see a Hilux this side of the world!
CDNN70
 
Posts: 13
Joined: Thu, 31 Mar 2022 3:30 +0000
Location: Canada

Re: Hilux KUN26L build in USA

Postby AmeriKUN26 on Thu, 21 Apr 2022 11:22 +0000

aj_hilux wrote:
AmeriKUN26 wrote:SPC UCAs installed this morning, no problems. No more rubbing and I can get as much caster as I want. Also installed a .25" spacer on the LH side to combat the lean. Should actually be done with suspension after an alignment tomorrow. :D Sad to see that my brand new CV boots already have some cracking after a couple hundred miles... :roll:

Image

Image

Image

Brand new set of uppers if any of you want to pay for shipping! :lol:

Image


Hey mate, where did you buy the UCA's from? Are they a tacoma part and if so do you have the part no.?

My spc uca's have flogged out the pivot bushing on one side and I need to replace them, but shops in aus want $600 for the x axis bushing kit. I can see them in the US for around $200. Just not sure which ones to get. It seems these ones will fit the taco of the same year

https://www.toyteclifts.com/25022-spc-x ... 25480.html


Hi, sorry for the slow response. I bought these from rockauto.com under the brand name Mevotech. They are SPCs when you receive them. The Mevotech ones are a lot cheaper. That said, I can't guarantee they will still be selling the SPC ones when ordered. The 05-15 Tacoma UCAs do indeed fit the Hilux, hope this helps.
User avatar
AmeriKUN26
 
Posts: 164
Joined: Fri, 28 Feb 2020 12:19 +0000
Location: Florida USA

Re: Hilux KUN26L build in USA

Postby AmeriKUN26 on Thu, 21 Apr 2022 11:30 +0000

CDNN70 wrote:This is such an awesome build! I am in Canada and am currently on the hunt to try and find one I can import here. cool to see a Hilux this side of the world!


Thanks! It's at a bit of a standstill right now but more to come, hope you find one!
User avatar
AmeriKUN26
 
Posts: 164
Joined: Fri, 28 Feb 2020 12:19 +0000
Location: Florida USA

Re: Hilux KUN26L build in USA

Postby AmeriKUN26 on Sat, 14 May 2022 12:21 +0000

Got out to some trails this weekend, made my need for a locker pretty apparent.

Image

Image
User avatar
AmeriKUN26
 
Posts: 164
Joined: Fri, 28 Feb 2020 12:19 +0000
Location: Florida USA

Re: Hilux KUN26L build in USA

Postby hiluxxury on Sat, 14 May 2022 5:02 +0000

Looks great
I might be wrong.

2005 SR Hilux 1KD - SOLD
2009 BMW X5 - destroyed by a hail storm
2012 Range Rover Sport SDV6 - SOLD
2015 Ford Ranger
User avatar
hiluxxury
Moderator
 
Posts: 1584
Joined: Sun, 20 Dec 2009 4:16 +0000
Location: Tasmania

Re: Hilux KUN26L build in USA

Postby AmeriKUN26 on Sat, 09 Mar 2024 8:22 +0000

Not much to update, put some Tacoma wheels on, the tires aren't very aggressive, will replace them down the
road.

https://photos.app.goo.gl/rzbazvG2kQ7WA3fx7
User avatar
AmeriKUN26
 
Posts: 164
Joined: Fri, 28 Feb 2020 12:19 +0000
Location: Florida USA

Re: Hilux KUN26L build in USA

Postby jaidensn70 on Tue, 19 Mar 2024 9:22 +0000

very interested in this build...

seen as its in the US when are you going to put 42 inch treps on it :lol:
2007 "EVIL N70" :twisted:
6 INCH LIFT
35's
326 HP
746 NM OF TORQUE
BUILT BY A 16 YR OLD :lol:
jaidensn70
 
Posts: 2
Joined: Tue, 19 Mar 2024 9:06 +0000
Location: Little Mountain, QLD

Previous

Return to Member Build Ups

Who is online

Users browsing this forum: No registered users and 40 guests