Hi,
Can anyone tell me the correct temperature setting for the fluid level with the no dipstick transmissions.
Have previously done fluid flush & set the level after a short drive to warm things up to operating temperature.
Overfilled the tranny by approx. 500 ml & dropped the level plug until a trickle of fluid & replace the plug. This procedure seems to work fine.
However I would like to be a bit more accurate, don't have a scan gauge & use an infrared digital thermometer which works fine on the pan.
Have checked various web sites, some say 46 degrees c, others say 40 to 45 degrees c & the last was 46 to 56 degrees c.
I have set mine at 53 degrees c at present.
Appreciate any information as to the correct temperature setting. Thank you.