FIXED!! So its the Drum Breaks all along. I just cleaned it and put some Copper grease on all the contact points. Thanks to all!!
Hi! So I bought a new Anti-Squeal Shims for my brake pads but I don't know how much should I apply the included Molybdenum Grease (3 Grams) at the back of the pads and at the other side of the shim.
![Image](https://scontent.fmnl4-6.fna.fbcdn.net/v/t1.0-0/s600x600/125439003_4054707614543604_3930915396911958468_o.jpg?_nc_cat=108&ccb=2&_nc_sid=b9115d&_nc_eui2=AeH2TuYkioqO5Cu600VGGaRIQCQCmbOSmmtAJAKZs5Kaa-bqtyj_uIcw4HaeQY6cIaE_TiTosdsAmRGL5xxlzdgr&_nc_ohc=TSRoXFagDwoAX9sexJO&_nc_ht=scontent.fmnl4-6.fna&tp=7&oh=145de24a72f63102e8731764b71e38f6&oe=5FDB438B)
My pads only have 2 Holes but the shapes of our pads was like the 6 Holes one.
![Image](https://scontent.fmnl4-6.fna.fbcdn.net/v/t1.0-0/s600x600/126020240_4054711311209901_8269529591464305702_o.jpg?_nc_cat=108&ccb=2&_nc_sid=b9115d&_nc_eui2=AeEjQauJIs_Ivnq8DqeVQTkj10AJaq4l2cjXQAlqriXZyFK7mnYu5OqAnx0uJNMlv1TDyK1b7wjc6Tl1M5TyujQ_&_nc_ohc=VJ8oLAEjTqQAX_Rv-Aq&_nc_ht=scontent.fmnl4-6.fna&tp=7&oh=6a72619e21311d1f92aaf41f0844954d&oe=5FD95080)
(Pic where the Grease should be applied, but how about the middle of the shims? where and How much should I Apply?)
(New Rotors and Pads, Still Squeals when braking at low speed. Already tried applying some Liqui Moly on the Old Shims but it only lessen the noise)
Thanks everyone !
![Image](https://scontent.fmnl4-3.fna.fbcdn.net/v/t1.0-0/p526x395/125507721_4054711187876580_7738737916646049458_o.jpg?_nc_cat=102&ccb=2&_nc_sid=b9115d&_nc_eui2=AeFZBcBb05RyR9F4NsXPg-1ggJwW20AeDh2AnBbbQB4OHUPjaj5-0YJDEUwg0_B7kWjutdo3SFhyVGOGx01kvx36&_nc_ohc=U8JL53DffToAX8r71Oj&_nc_ht=scontent.fmnl4-3.fna&tp=6&oh=b8aaf5346e26dc25f71f9a6ddba21aa3&oe=5FDB21A9)