dervdave wrote:Your a very handy fella
Thanks!
Finally made some headway yesterday, finished up the RH side and reinstalled the airbox.
Wired the winch shut-off solenoid up and finished looming the left hand side. still waiting on .25 split loom for multiple areas...
Loomed up the wiring into the cab, I added 2 extra wires to the center dash switch locations and 2 extra to the drivers switch locations for future additions to the HWB60 fuse/relay box, Also a 16ga from the fusebox to be used for a USB receptacle. Wiring should be indiscernible from OEM when complete.
Removed the hood release cable gaiter and installed a grommet for the pass through.
And lastly got the bracket for the HWB60 sprayed and baked.