Removing that annoying beeping once and for all

Removing that annoying beeping once and for all

Postby Scoobalimalima on Thu, 13 Feb 2020 6:46 +0000

I've seen lots of ideas on this page on how to remove the key beeper and seatbelt beeper etc by performing wiring mods. I went right to the source of the problem and removed the damn piezo buzzer itself, took no longer than 5 mins start to finish. The piezo is on the circuit board on the back of the instrument cluster (speedo/tacho etc). With the cluster removed, you just remove the back cover to expose the circuit board, the piezo buzzer is easy to spot, about a dozen twists left/right and it popped right off, the two pins cleanly snapped off flush with the circuit board, (I could of de-soldered the piezo from the other side of the circuit board but you have to remove all the instrument needles to do this which I was not to keen on doing).

No more annoying beeping, ever!

I cannot seem to get my pictures to show on this post, copy and paste the below link for pictures


User avatar
Posts: 68
Joined: Sat, 10 Feb 2018 8:53 +0000
Location: Scarborough, WA


Re: Removing that annoying beeping once and for all

Postby territorian on Tue, 14 Apr 2020 5:46 +0000

Is this Piezo buzzer used for any other alarms or warnings?

IF its ONLY the annoying beeping then sure remove it, BUT if its there for more important functions then maybe not?
Posts: 19
Joined: Thu, 09 Sep 2010 7:42 +0000

Return to Electrical

Who is online

Users browsing this forum: No registered users and 1 guest