Hilux KUN26L build in USA

Want to show off what you've done to your rig? or have a custom project to show? Post it up here!

Re: Hilux KUN26L build in USA

Postby Caleebra on Fri, 20 Mar 2020 7:07 +0000

That's a gem right there! Don't think there is any other registered in the states with US plates! (not that I have heard of at least!)

I wonder what parts from the Tacoma can fit on to the Hilux with minor adjustments... This is something I have been curious about for years!
- Arne from Norway here, glad to chat with you -

Instagram: @arnlux_adv
Facebook: - Arn's Lux Adventure -
:D
User avatar
Caleebra
 
Posts: 266
Joined: Thu, 23 Feb 2012 7:32 +0000
Location: Norway


 

Re: Hilux KUN26L build in USA

Postby hiluxxury on Sun, 22 Mar 2020 11:49 +0000

Caleebra wrote:I wonder what parts from the Tacoma can fit on to the Hilux with minor adjustments... This is something I have been curious about for years!


Some parts do, some don't. Gearboxes, some driveline parts are the same (depending on which generation).. the suspension parts, while they look similar, are different. LCAs for example are different (might be the same but part# are different) but you can make them fit. Springs are softer all round (current generation spring hanger on the rear is upside down like an Amarok).

The frames are totally different - they are box section until the end of the cab and then they are C section...if they haven't rusted out already.

The Tacoma is really a Hilux lite.
I might be wrong.

2005 SR Hilux 1KD - SOLD
2009 BMW X5 - destroyed by a hail storm
2012 Range Rover Sport SDV6 - SOLD
2015 Ford Ranger
User avatar
hiluxxury
Moderator
 
Posts: 1584
Joined: Sun, 20 Dec 2009 4:16 +0000
Location: Tasmania

Re: Hilux KUN26L build in USA

Postby MikeO on Sun, 22 Mar 2020 8:02 +0000

Wonder how many newer Hiluxs in USA, I have a 2009 for 9 years now.
User avatar
MikeO
 
Posts: 89
Joined: Fri, 06 May 2011 6:25 +0000

Re: Hilux KUN26L build in USA

Postby AmeriKUN26 on Mon, 23 Mar 2020 1:24 +0000

I'm not having a lot of luck cross referencing parts to Taco stuff. As you guys mentioned a few tidbits will swap over in the suspension, but overall not much. Had it out on some trails yesterday, and even with the new injectors etc. I'm noticing a rattle under load at certain RPMs. It continues on deceleration until idle and then stops. I also noticed it is very loud during the fuel leak test in Techstream when it increases fuel pressure and RPMs to 2k. I'm still reading through the threads on here about rattles to try to find the source. Would be nice if I had another one to listen to, not sure what's normal!

Image
Last edited by AmeriKUN26 on Fri, 26 Jun 2020 10:50 +0000, edited 1 time in total.
User avatar
AmeriKUN26
 
Posts: 164
Joined: Fri, 28 Feb 2020 12:19 +0000
Location: Florida USA

Re: Hilux KUN26L build in USA

Postby AmeriKUN26 on Mon, 23 Mar 2020 1:27 +0000

MikeO wrote:Wonder how many newer Hiluxs in USA, I have a 2009 for 9 years now.


Not sure, I've only seen one or two that were on military bases for special ops use.
User avatar
AmeriKUN26
 
Posts: 164
Joined: Fri, 28 Feb 2020 12:19 +0000
Location: Florida USA

Re: Hilux KUN26L build in USA

Postby hiluxxury on Mon, 23 Mar 2020 4:52 +0000

They do rattle a bit... what are the injector feedback values in techstream? Given they are new injectors, it shouldn't be too bad. Perhaps have a look at the SCV pressure compared to the target pressure.
I might be wrong.

2005 SR Hilux 1KD - SOLD
2009 BMW X5 - destroyed by a hail storm
2012 Range Rover Sport SDV6 - SOLD
2015 Ford Ranger
User avatar
hiluxxury
Moderator
 
Posts: 1584
Joined: Sun, 20 Dec 2009 4:16 +0000
Location: Tasmania

Re: Hilux KUN26L build in USA

Postby MikeO on Mon, 23 Mar 2020 6:43 +0000

I get a lot of my maintenance parts from Mick's Garage in Ireland, usually has the lowest shipping rates to USA.
User avatar
MikeO
 
Posts: 89
Joined: Fri, 06 May 2011 6:25 +0000

Re: Hilux KUN26L build in USA

Postby AmeriKUN26 on Mon, 23 Mar 2020 8:54 +0000

hiluxxury wrote:They do rattle a bit... what are the injector feedback values in techstream? Given they are new injectors, it shouldn't be too bad. Perhaps have a look at the SCV pressure compared to the target pressure.


Injector feedback values are all less than 1, going to pull off the scv tomorrow night and have a look at it's condition. I don't remember the target pressure, I'll compare and report back, thanks!
User avatar
AmeriKUN26
 
Posts: 164
Joined: Fri, 28 Feb 2020 12:19 +0000
Location: Florida USA

Re: Hilux KUN26L build in USA

Postby AmeriKUN26 on Mon, 23 Mar 2020 8:55 +0000

MikeO wrote:I get a lot of my maintenance parts from Mick's Garage in Ireland, usually has the lowest shipping rates to USA.


Thanks, I'll check them out!
User avatar
AmeriKUN26
 
Posts: 164
Joined: Fri, 28 Feb 2020 12:19 +0000
Location: Florida USA

Re: Hilux KUN26L build in USA

Postby hiluxxury on Mon, 23 Mar 2020 11:58 +0000

Check the ytube for info on the SCV

https://www.youtube.com/watch?v=Iy79uqnrerY

Short story: just buy the new updated version if it isn't already fitted.
I might be wrong.

2005 SR Hilux 1KD - SOLD
2009 BMW X5 - destroyed by a hail storm
2012 Range Rover Sport SDV6 - SOLD
2015 Ford Ranger
User avatar
hiluxxury
Moderator
 
Posts: 1584
Joined: Sun, 20 Dec 2009 4:16 +0000
Location: Tasmania

Re: Hilux KUN26L build in USA

Postby AmeriKUN26 on Tue, 24 Mar 2020 4:47 +0000

Got the SCV out, took it apart and unfortunately it was spotless. I cleaned it up anyway and checked it on the bench. Operation was quick and smooth.

Image

Image


It is the older version so I'll get the updated version on order in the near future.

Techstream data is as follows:

Cold

Image

Hot

Image
Last edited by AmeriKUN26 on Fri, 26 Jun 2020 10:53 +0000, edited 1 time in total.
User avatar
AmeriKUN26
 
Posts: 164
Joined: Fri, 28 Feb 2020 12:19 +0000
Location: Florida USA

Re: Hilux KUN26L build in USA

Postby hiluxxury on Tue, 24 Mar 2020 6:45 +0000

Target pressure is within the 2000kpa spec. Keen to hear if the longer version makes any changes.
I might be wrong.

2005 SR Hilux 1KD - SOLD
2009 BMW X5 - destroyed by a hail storm
2012 Range Rover Sport SDV6 - SOLD
2015 Ford Ranger
User avatar
hiluxxury
Moderator
 
Posts: 1584
Joined: Sun, 20 Dec 2009 4:16 +0000
Location: Tasmania

Re: Hilux KUN26L build in USA

Postby AmeriKUN26 on Tue, 24 Mar 2020 11:07 +0000

hiluxxury wrote:Target pressure is within the 2000kpa spec. Keen to hear if the longer version makes any changes.


It may be a bit before I get a replacement but I'll definitely report back! I'm beginning to think that what I'm hearing is normal for this engine...
User avatar
AmeriKUN26
 
Posts: 164
Joined: Fri, 28 Feb 2020 12:19 +0000
Location: Florida USA

Re: Hilux KUN26L build in USA

Postby hiluxxury on Tue, 24 Mar 2020 12:36 +0000

Yep, they do rattle. Some more than others but if you have new injectors and the seats are good you should have most of the potential problems sorted.
I might be wrong.

2005 SR Hilux 1KD - SOLD
2009 BMW X5 - destroyed by a hail storm
2012 Range Rover Sport SDV6 - SOLD
2015 Ford Ranger
User avatar
hiluxxury
Moderator
 
Posts: 1584
Joined: Sun, 20 Dec 2009 4:16 +0000
Location: Tasmania

Re: Hilux KUN26L build in USA

Postby fubar on Thu, 26 Mar 2020 7:40 +0000

They do rattle... nasty sounding engine but they will get you arou d the world
fubar
 
Posts: 107
Joined: Wed, 09 Dec 2009 8:15 +0000

Re: Hilux KUN26L build in USA

Postby AmeriKUN26 on Tue, 07 Apr 2020 7:51 +0000

fubar wrote:They do rattle... nasty sounding engine but they will get you arou d the world


Counting on that!

Also, just finished my second tank of gas with the new injectors etc. 660 Ks til the fuel light came on. 20.050 gallons to fill up. Came out to 21 mpg, pretty good with lift and the current tires!
User avatar
AmeriKUN26
 
Posts: 164
Joined: Fri, 28 Feb 2020 12:19 +0000
Location: Florida USA

Re: Hilux KUN26L build in USA

Postby AmeriKUN26 on Wed, 27 May 2020 9:49 +0000

Found some trails this weekend. Also, Dobinsons snorkel arrived and will be installed tomorrow.

Image
Last edited by AmeriKUN26 on Fri, 26 Jun 2020 10:54 +0000, edited 1 time in total.
User avatar
AmeriKUN26
 
Posts: 164
Joined: Fri, 28 Feb 2020 12:19 +0000
Location: Florida USA

Re: Hilux KUN26L build in USA

Postby hiluxxury on Wed, 27 May 2020 6:28 +0000

Looks like you could be here in Australia.

Good luck with the snorkel install.
I might be wrong.

2005 SR Hilux 1KD - SOLD
2009 BMW X5 - destroyed by a hail storm
2012 Range Rover Sport SDV6 - SOLD
2015 Ford Ranger
User avatar
hiluxxury
Moderator
 
Posts: 1584
Joined: Sun, 20 Dec 2009 4:16 +0000
Location: Tasmania

Re: Hilux KUN26L build in USA

Postby AmeriKUN26 on Thu, 28 May 2020 3:47 +0000

Thanks! It went relatively smoothly. Despite counterpunching the holes with the template the aft most hole was off a bit and had to be elongated. All the clips on the fender flare need to be replaced and the flare itself looks like it was poorly removed before, broken tabs etc.

Image

Image

Image

Image

Image

Image

Image
Last edited by AmeriKUN26 on Fri, 26 Jun 2020 10:57 +0000, edited 1 time in total.
User avatar
AmeriKUN26
 
Posts: 164
Joined: Fri, 28 Feb 2020 12:19 +0000
Location: Florida USA

Re: Hilux KUN26L build in USA

Postby AmeriKUN26 on Thu, 28 May 2020 3:48 +0000

Are there any decent aftermarket flares out there that use all of the factory mounting points?
User avatar
AmeriKUN26
 
Posts: 164
Joined: Fri, 28 Feb 2020 12:19 +0000
Location: Florida USA

PreviousNext

Return to Member Build Ups

Who is online

Users browsing this forum: No registered users and 18 guests