Scangauge setting for 2019

[jazzi]

Hi Guys,
Is there any one have setting EGT and DPF shoot % for 2019?
I used this following for DPF Shoot % and i think reading is incorrect. its show 300


DPF
TXD 07DF0178
RXF 032100000000
RXD 2010
MTH 0001000AFFD8

Thanks

[numberplate]

DPF Level Accumulation Guage ( DPA ) ( in % )
TXD: 07E02138
RXF: 032104780000
RXD: 4008
MTH: 000200010000 ( x2 % ) or 000100010000 ( x 1 % )


this works on my 2019

[Andyfive]

This works on a 2016.

Look here https://www.scangauge.com.au/toyota-x-gauges/

[jazzi]

Hay mate,
What's the maximum reading you getting. Mine showing 96.
around what level it start burning?
Sorry for all the questions mate.
Thanks

DPF Level Accumulation Guage ( DPA ) ( in % )
TXD: 07E02138
RXF: 032104780000
RXD: 4008
MTH: 000200010000 ( x2 % ) or 000100010000 ( x 1 % )


this works on my 2019

[numberplate]

Mine starts at around 100% , then burns down to about 4%. worst ive ever seen it was 130% but that was with the last car and a buggered DPF

[jazzi]

Thanks mate. Its do the same thing on mine. but i cant see massive increase on EGT reading.

Mine starts at around 100% , then burns down to about 4%. worst ive ever seen it was 130% but that was with the last car and a buggered DPF