Mounting fuse box

Mounting fuse box

Postby spectre01 on Tue, 05 Nov 2019 6:47 +0000

Hi,

Has anyone ever mounted a fusebox in the empty pocket up behind the left wheel arch?

Its half out of the way, might get a bit wet, but the panel doesnt appear to have any debris/ splash marks etc from the last 10k driving bitumen, dirt, wet roads etc.

Image
Image

Space is perfect size to fit something like the attached.
Image

Thinking could run fused 8b&s to it from main battery, then split off anderson into tray, anderson to trailer & leave a good junction point to add any extras to tray, lights etc.

Not stressed over dual battery setups etc. yet.

Cheers
spectre01
 
Posts: 5
Joined: Tue, 05 Nov 2019 6:30 +0000
Location: Rockhampton


 

Re: Mounting fuse box

Postby SurferSR5 on Wed, 06 Nov 2019 4:05 +0000

I can't offer you much in relation to the fuse box idea, location...

But.

Stopped by just to say nice MS paint skills. ;)
User avatar
SurferSR5
 
Posts: 43
Joined: Tue, 29 Oct 2019 6:13 +0000
Location: Tweed Coast, Northern NSW

Re: Mounting fuse box

Postby DeadlyBeast on Wed, 06 Nov 2019 5:00 +0000

It would be possible and outta sight but gotta consider changing the fuses / ease of access for accessory lines... maybe an access panel cut into the inner tub skin?
No creek crossings in the distant future? Mounting above the tray line would help mitigate water ingress
Sorry, can't see your last image on mobile
________________________
2007 SR5 D4D Auto
2014 SR D4D Auto
Build Thread
DeadlyBeast
Moderator
 
Posts: 1914
Joined: Sat, 26 May 2012 7:42 +0000
Location: Top End

Re: Mounting fuse box

Postby spectre01 on Wed, 06 Nov 2019 5:50 +0000

SurferSR5 wrote:I can't offer you much in relation to the fuse box idea, location...

But.

Stopped by just to say nice MS paint skills. ;)



Made my day... I knew there was a reason I signed up for this forum.

ALSO, temporarily mounted it there to see. Would be nice to find a waterproof unit. Its as high if not higher than the headlight leveller on the rear suspension & another electronic box ?brake controller"? up in the rear.
Creek crossings up to axle line is the max for me. More sand a possible issue.

If its no good, ill move it.

WOW these are big pictures... I'll edit & try again.

Please note only the Anderson plug is connected at the moment.

Image

Image

Image


Anderson plug in rear of tray. Wires fed up & through opening under the top rail near the rear.


Image
spectre01
 
Posts: 5
Joined: Tue, 05 Nov 2019 6:30 +0000
Location: Rockhampton

Re: Mounting fuse box

Postby DeadlyBeast on Wed, 06 Nov 2019 6:34 +0000

Nice one. Good to see someone think outside the box
It may still get fairly wet and full of crud in that location but that unit could fit into a water tight box like a junction box you can get from bunnings - just a matter of sealing up where the power feeds in and out.
Possibly easier and more reliable to mount it inside the tub with sika flex where the Anderson plug is then run output power from there
________________________
2007 SR5 D4D Auto
2014 SR D4D Auto
Build Thread
DeadlyBeast
Moderator
 
Posts: 1914
Joined: Sat, 26 May 2012 7:42 +0000
Location: Top End

Re: Mounting fuse box

Postby spectre01 on Wed, 06 Nov 2019 8:14 +0000

DeadlyBeast wrote:Nice one. Good to see someone think outside the box.


You mean outside the tub 8-)
spectre01
 
Posts: 5
Joined: Tue, 05 Nov 2019 6:30 +0000
Location: Rockhampton

Re: Mounting fuse box

Postby spectre01 on Sun, 23 Feb 2020 2:13 +0000

Quick update on this. After 3mth. Mostly highway. Few weeks rainy highway and couple hundred k of wet corrugated dirt road.

Works a treat. I'm actually really surprised at how protected this area is from the elements. Even 200mm water crossing wasn't enough to hit it. There is the expected bulldust etc but that's it. I've washed the rest of the car but not this area. It's hardly worse than the original photos tbh.

Easy enough out of the way something different install.

I'll let u know again after we hit some sand in the future. That'll really test it.
spectre01
 
Posts: 5
Joined: Tue, 05 Nov 2019 6:30 +0000
Location: Rockhampton


Return to Electrical

Who is online

Users browsing this forum: No registered users and 2 guests