by fracturedranga on Sun, 29 Apr 2018 9:45 +0000
I'm sure this has probably been covered somewhere but I'm stuck in the middle of nowhere and don't have the luxury of reading through heaps of pages.
So driving from Townsville to dalby today made it about 40km out of Biloela and lost all power, zero boost nothing then conked out. Pulled over and checked the fuel filter primer. Soft as fuel lines soft as well. So figured I had a blocked filter. Changed them out to new ones primed it up hard cranked it over still nothing. Went and checked I hadn't f$@#&% the filter swap and no leaks. I cam prime it to hard but loses it as soon as I crank. Checked my rail pressure with torque on my phone. It's showing zero as in no rail pressure at all when I crank it. I've checked the plugs on the scv and rail both are fine all the vac lines are fine. Cranks no worries no bad noises and has no fault codes.
Any ideas? I'm about 400km from home and have a loaded car trailer hooked up. Sick to death of this pos lemon hilux