So installed my Long ranger Tank the other day (painted black to make touch ups easier for the future.)
So here are my thoughts on the missing 15L.
At time of install my onboard computer told me I had 40-50km of fuel left.
Pulled the tank and the sender. Found the following.
So from the pics the sender Unit at empty end of the float it seems to me that it sits 16mm from the bottom of the tank.
That’s 16mm of fuel in bottom of tank after you hit refuel.
It’s the small end of the tank but when tank was vertical (to get the fuel out into the new one) where my hand is shows how much fuel remained inside this is a major portion of the tank.
Now on install Long ranger recommend their new float arm is bent Till it barely touches the ground on a flat level surface when installed. (Aka once installed it’s just barely touching bottom of tank) otherwise your missing bottom 16mm of tank capacity.
Must admit I really like the install super easy as I remember (been a year+ since I done this full time) final install with water tank looks good.
So basically I don’t know how they can be doing a software update when in my eyes it’s a hardware design flaw.
But I’m no engineer either.
Any questions feel free to ask.
Sent from my iPhone using Tapatalk