Time to upgrade the spotties, the halogen spotlights weren't doing much and the mounts had become loose, my attempts at tightening failed, heaps of wobble whilst driving with them on.
Decided to go LED spotlights these ebay Cree units with DRL light bar in the middle looked interesting so gave them a go. They are red in color and wasn't sure if they would go with the front-end but I can paint if need be.
The new mounts are much better 3 bolts to the bullbar each light and two bolts to lock the angle in place. The lights didnt come with any wiring just bare ends but was fairly simple to wire up with my previous loom in place.
here is the before and after image
I tried the DRL function of the light, connected to my parkers but its fairly bright and a little bit wanky, plus my parkers are on all the time with car so decided against the DRL, just wired them to the spotlight positive so they all come on together.
I took the car out for a test with the new lights, some shots from above.
Very happy with the light output, I blew the 15 amp fuse straight way though, tried 20 amp same result have since bumped to 30 amp and it seems stable, seller recommended 40 amp didn't have any handy will see how the 30 goes.
The mounts are allot better no wobble at all very strong see how they go over time.
With the lightbar in combination I have shitloads of light output very happy.
Well after a few days I decided the red was not really my thing, off with the surrounds and on with the flat black paint, same as the bar.
I'm much happier with the results now, they stand out less and match the color of the rest of the car.