How are the new Bfg's performing?
Good on the beach?
shamat wrote:Elockers and 4.56 ratios in today...
What a difference!
Sent from my SM-G930F using Tapatalk
dano85 wrote:Brondonnnn wrote:
I’m Keen on a hose like that, does it have the barb for the blow by hose? And do you think there would be enough length for a 2” body lift?
apSlain wrote:Fixed a stripped seat thread this morning. The entire thread on the passenger side seat was gone, and only the top three threads would tighten. Still, it was loose and you could shake it out (not to mention safety)...
This can be fixed with a helicoil and a new bolt from Toyota (p/n 90119-10921) for about $2.50. You'll also want an M10 * 1.25mm helicoil. If you go via Bunnings, you want this kit but I acknowledge it's way overpriced and eBay would be a better option.
I used the linked item and I fixed everything very easily with no troubles but the tap tool is plastic. Don't try and force the tap, especially when you reverse the tap when you're trying to break off swarf. You're better off doing fast and frequent rotations to gradually break them (with the linked tool, anyway).
Helicoils have been working great for me thus far. They're also serving as the thread in my intercooler.
Anyway, fixing that thread made way to fit a fire extinguisher in the front passenger seat using this bracket:
Jmac Diff and Gear.scottellis88 wrote:shamat wrote:Elockers and 4.56 ratios in today...
What a difference!
Sent from my SM-G930F using Tapatalk
Where did you get your Elockers and gears from?
Users browsing this forum: No registered users and 136 guests