265/50/R20 tyres

Need something to get you rolling?

265/50/R20 tyres

Postby Dtilly on Sun, 23 Jul 2017 6:07 +0000

I have just purchased 20" rims fitted with 265/50/R20 tyres i was told by the tyre place they would fit without any problem however after fitting them to my 2013 SR5 i have found that they scrape on the mud flaps is there a way to stop this or do i need smaller rims and tyres
Dtilly
 
Posts: 2
Joined: Sat, 25 Feb 2017 5:18 +0000
Location: Cobdogla


 

Re: Wheels and tyres

Postby iller on Sun, 23 Jul 2017 6:31 +0000

Remove the mudflaps i guess or get smaller rims.
iller
 
Posts: 183
Joined: Mon, 02 Jan 2017 11:55 +0000
Location: Sweden

Re: Wheels and tyres

Postby TOYZX on Sun, 23 Jul 2017 6:38 +0000

Firstly you asked ya question in the wrong section but I'm sure the heads will move it. What offset are the rims?? Any lift? How bad is it rubbing? There is a whole thread on here somewhere about fitting 32 inch tyres. Trim or remove the mudflaps, get a lift, get an alignment done and max the castor out.

Sent from my SM-G955F using Tapatalk
User avatar
TOYZX
Moderator
 
Posts: 2919
Joined: Wed, 08 May 2013 7:58 +0000

Re: Wheels and tyres

Postby Dtilly on Sun, 23 Jul 2017 7:28 +0000

Sorry new to the sight thanks for the advise
Dtilly
 
Posts: 2
Joined: Sat, 25 Feb 2017 5:18 +0000
Location: Cobdogla

Re: Wheels and tyres

Postby Hutch on Sun, 23 Jul 2017 7:38 +0000

See if u can pull the castor forward, have a chat to your tyre shop see what adjustment is left?


Hutch- 2016 Toyota Hilux D4D Auto Dual Cab - Red, it goes faster...
Hutch- 2016 SR5 Dual Cab D4D Auto.....Red as it goes faster..
User avatar
Hutch
 
Posts: 165
Joined: Sun, 11 Nov 2007 2:00 +0000
Location: Brisbane, QLD

Re: 265/50/R20 tyres

Postby DeadlyBeast on Mon, 24 Jul 2017 7:51 +0000

Thread moved to correct section
Title edited for clarity
________________________
2007 SR5 D4D Auto
2014 SR D4D Auto
Build Thread
DeadlyBeast
Moderator
 
Posts: 1914
Joined: Sat, 26 May 2012 7:42 +0000
Location: Top End


Return to Tyres & Wheels

Who is online

Users browsing this forum: Mark Simmonds and 3 guests