Fitting rear drawers

General discussion of basically anything related to the 2015> Hilux

Re: Fitting rear drawers

Postby Stevenesta on Mon, 23 Jan 2017 5:12 +0000

Are the drawers stuck together or can you fit them in 1 by 1?
Stevenesta
 
Posts: 5
Joined: Sat, 28 May 2016 7:49 +0000
Location: Mill park victoria


 

Re: Fitting rear drawers

Postby AJH1 on Mon, 23 Jan 2017 5:54 +0000

Stevenesta wrote:Are the drawers stuck together or can you fit them in 1 by 1?

Have to fit them as you see them
User avatar
AJH1
 
Posts: 63
Joined: Thu, 01 Dec 2016 2:06 +0000
Location: Inverleigh, Victoria

Re: Fitting rear drawers

Postby ktm300 on Tue, 24 Jan 2017 3:58 +0000

Stevenesta wrote:Are the drawers stuck together or can you fit them in 1 by 1?



I have tried to seperate the drawers but you cant the only way I found to purchase a single drawer is to buy a kingchrome single drawer
User avatar
ktm300
 
Posts: 799
Joined: Tue, 18 Jan 2011 4:28 +0000
Location: Yarrawonga Victoria

Re: Fitting rear drawers

Postby creaky on Tue, 24 Jan 2017 7:58 +0000

ktm300 wrote:
Stevenesta wrote:Are the drawers stuck together or can you fit them in 1 by 1?



I have tried to seperate the drawers but you cant the only way I found to purchase a single drawer is to buy a kingchrome single drawer


Or Ironman http://www.ironman4x4.com/products/sing ... wer-1300mm

Or Drifta http://www.drifta.com.au/drifta-single-draw/
creaky
 
Posts: 334
Joined: Sun, 26 Jun 2016 12:41 +0000
Location: Brisbane, Queensland

Re: Fitting rear drawers

Postby Spitfia on Tue, 24 Jan 2017 10:13 +0000

I think even outback sell single drawers also
YOU LOOKIN AT MY EYE?!!!
MY10 2011 SR Hilux DC, Steinbauer Module, 2" lift, BFG AT 265/75R16 etc. etc. etc.
User avatar
Spitfia
 
Posts: 262
Joined: Sat, 28 May 2016 1:46 +0000
Location: Perth, WA

Re: Fitting rear drawers

Postby ktm300 on Tue, 24 Jan 2017 6:39 +0000

creaky wrote:
ktm300 wrote:
Stevenesta wrote:Are the drawers stuck together or can you fit them in 1 by 1?



I have tried to seperate the drawers but you cant the only way I found to purchase a single drawer is to buy a kingchrome single drawer


Or Ironman http://www.ironman4x4.com/products/sing ... wer-1300mm

Or Drifta http://www.drifta.com.au/drifta-single-draw/

Ironman looked crap my kinchrome cost 600 for a single ?
Would like to see other that cheap .
User avatar
ktm300
 
Posts: 799
Joined: Tue, 18 Jan 2011 4:28 +0000
Location: Yarrawonga Victoria

Re: Fitting rear drawers

Postby creaky on Tue, 24 Jan 2017 7:28 +0000

What was different with the ironman ? I haven't seen either in the flesh but kinchrome should be ok. Does the kinchrome come in anything longer than 950mm ?
creaky
 
Posts: 334
Joined: Sun, 26 Jun 2016 12:41 +0000
Location: Brisbane, Queensland

Re: Fitting rear drawers

Postby ktm300 on Wed, 25 Jan 2017 3:56 +0000

creaky wrote:What was different with the ironman ? I haven't seen either in the flesh but kinchrome should be ok. Does the kinchrome come in anything longer than 950mm ?



No it doesn't come any longer I think the ironman was smaller in length ,

Bunnings had the kinchrome one on special at 600 . Which is not to bad .
User avatar
ktm300
 
Posts: 799
Joined: Tue, 18 Jan 2011 4:28 +0000
Location: Yarrawonga Victoria

Re: Fitting rear drawers

Postby ducky_29 on Sat, 27 May 2017 5:43 +0000

Hi Guys,

I'm also looking at fitting 4WD Supacentre drawers.

Question- does anyone have a photo of the SR5 Tray with the plastic tub liner removed/not fitted? Trying to work out the best position to drill through or whether by chance there's a mounting point underneath.

Any photos/measurements would be much appreciated.
ducky_29
 
Posts: 10
Joined: Fri, 28 Mar 2014 6:48 +0000

Re: Fitting rear drawers

Postby Zacc06 on Sun, 28 May 2017 5:17 +0000

I have some photos of the 4x4 supercenter draws that are about 90% completed but i can't add photos for some reason?
Zacc06
 
Posts: 3
Joined: Fri, 28 Apr 2017 8:28 +0000
Location: Australia

Re: Fitting rear drawers

Postby Dazza32 on Sun, 28 May 2017 5:51 +0000

Fitted mine the same way, in the middle. Have storage up front of them for portable solar panel. Side areas fit shopping bags for my wife so win win. Had to go around and tighten all fittings on drawers after week. Not moved since. Great drawers. Just measured up before drilling. I have a spray coat in tub so easier.
Dazza32
 
Posts: 33
Joined: Wed, 22 Mar 2017 6:21 +0000
Location: Darwin

Re: Fitting rear drawers

Postby ducky_29 on Mon, 29 May 2017 10:58 +0000

Zacc06 wrote:I have some photos of the 4x4 supercenter draws that are about 90% completed but i can't add photos for some reason?


If you look up Sandpit in forum there is a tutorial on how to add photos. I've never added them but it look like you can't just paste them in.

Would be really helpful to know where you've drilled through to mount them.

Cheers!
ducky_29
 
Posts: 10
Joined: Fri, 28 Mar 2014 6:48 +0000

Re: Fitting rear drawers

Postby ducky_29 on Mon, 29 May 2017 11:01 +0000

Dazza32 wrote:Fitted mine the same way, in the middle. Have storage up front of them for portable solar panel. Side areas fit shopping bags for my wife so win win. Had to go around and tighten all fittings on drawers after week. Not moved since. Great drawers. Just measured up before drilling. I have a spray coat in tub so easier.


Hey Dazza, Any chance of posting a photo of the mounting points? (and a measurement would be a great help)
ducky_29
 
Posts: 10
Joined: Fri, 28 Mar 2014 6:48 +0000

Re: Fitting rear drawers

Postby Dazza32 on Mon, 29 May 2017 6:21 +0000

ducky_29 wrote:
Dazza32 wrote:Fitted mine the same way, in the middle. Have storage up front of them for portable solar panel. Side areas fit shopping bags for my wife so win win. Had to go around and tighten all fittings on drawers after week. Not moved since. Great drawers. Just measured up before drilling. I have a spray coat in tub so easier.


Hey Dazza, Any chance of posting a photo of the mounting points? (and a measurement would be a great help)

Yea can do. Asap.
Dazza32
 
Posts: 33
Joined: Wed, 22 Mar 2017 6:21 +0000
Location: Darwin

Re: Fitting rear drawers

Postby Zacc06 on Mon, 29 May 2017 7:04 +0000

My plan for mounting the to the tub is with a nut rivert tool in m8 thread. Just take the two tops off the draws then pull the sliding draws out drill the 4 holes to the correct diameter insert but nut rivert job done. I'll try and work out how to get photos up tomorrow.
Zacc06
 
Posts: 3
Joined: Fri, 28 Apr 2017 8:28 +0000
Location: Australia

Re: Fitting rear drawers

Postby Dazza32 on Tue, 30 May 2017 5:08 +0000

Dazza32 wrote:
ducky_29 wrote:
Dazza32 wrote:Fitted mine the same way, in the middle. Have storage up front of them for portable solar panel. Side areas fit shopping bags for my wife so win win. Had to go around and tighten all fittings on drawers after week. Not moved since. Great drawers. Just measured up before drilling. I have a spray coat in tub so easier.


Hey Dazza, Any chance of posting a photo of the mounting points? (and a measurement would be a great help)

Yea can do. Asap.

As you can see fixings are adjustable. I just centered drawers and only drilled small pilot hole to check clear area for fixes. Easy as to fit. Nyloc nuts supplied.ImageImageImageImageImage

Sent from my SM-G930F using Tapatalk
Dazza32
 
Posts: 33
Joined: Wed, 22 Mar 2017 6:21 +0000
Location: Darwin

Re: Fitting rear drawers

Postby Zacc06 on Sun, 04 Jun 2017 3:05 +0000

ImageImageImageImage


Sent from my iPhone using Tapatalk
Zacc06
 
Posts: 3
Joined: Fri, 28 Apr 2017 8:28 +0000
Location: Australia

Re: Fitting rear drawers

Postby squireocallaghan on Wed, 21 Jun 2017 1:49 +0000

Looks good. I've these also in my hilux. How did you make the trim around the outside??
squireocallaghan
 
Posts: 13
Joined: Wed, 17 May 2017 8:06 +0000
Location: VICTORIA

Re: Fitting rear drawers

Postby Silverfox1111 on Sun, 13 Aug 2017 6:00 +0000

Gday all
Has anyone fitted a set of supacentre draws on top of the toyota tub liner?
Silverfox
Silverfox1111
 
Posts: 147
Joined: Sun, 28 May 2017 6:44 +0000
Location: Dapto. NSW.

Previous

Return to General Discussion

Who is online

Users browsing this forum: No registered users and 2 guests