Zed's shed!!

Want to show off what you've done to your rig? or have a custom project to show? Post it up here!

Re: Zed's shed!!

Postby taresk on Tue, 21 Jul 2015 7:57 +0000

Wow, you really are lucky it wasn't on the highway...
User avatar
taresk
 
Posts: 659
Joined: Sat, 13 Aug 2011 12:53 +0000
Location: Lithgow, NSW


 

Re: Zed's shed!!

Postby nicebike on Thu, 23 Jul 2015 10:36 +0000

That's more than a little concerning. Be interested to hear the diagnosis.It looks like maybe very little penetration of the weld.
nicebike
 
Posts: 736
Joined: Thu, 27 Feb 2014 7:28 +0000

Re: Zed's shed!!

Postby packeteer on Wed, 12 Aug 2015 1:22 +0000

seized bushes were to blame

everything was covered, so no out of pocket for me
2011 Dual Cab SR5 D4D manual.
build thread
shed page
User avatar
packeteer
 
Posts: 3468
Joined: Wed, 27 Apr 2011 1:49 +0000
Location: Chatswood, Sydney

Re: Zed's shed!!

Postby packeteer on Mon, 02 Nov 2015 9:15 +0000

belated updates:

replaced my Oricom UHF with an ICOM 450N. Installed in a similar location (behind the glove box). I reused the existing wiring, so nothing special to show. There's a noticeable improvement in sound quality and receive sensitivity.
2011 Dual Cab SR5 D4D manual.
build thread
shed page
User avatar
packeteer
 
Posts: 3468
Joined: Wed, 27 Apr 2011 1:49 +0000
Location: Chatswood, Sydney

Re: Zed's shed!!

Postby packeteer on Mon, 02 Nov 2015 9:25 +0000

I went down to Baileys Diesel last week and had my EGR + intake cleaned. Also had a retune. We've now got fuel and boost coming on earlier, resulting in more torque and better economy.

Also had a factory tour. They've got an impressive setup down there! The amount of coin spent on high end equipment is just staggering.
2011 Dual Cab SR5 D4D manual.
build thread
shed page
User avatar
packeteer
 
Posts: 3468
Joined: Wed, 27 Apr 2011 1:49 +0000
Location: Chatswood, Sydney

Re: Zed's shed!!

Postby packeteer on Wed, 23 Dec 2015 1:02 +0000

so 107k and and I did a mini service before the Christmas trip

Donaldson air filter
Stanadyne fuel filter
rear diff (nulon full synth)

also got round to blocking the egr (2x 1/8th holes)

EDIT: forgot to add that I had the alternator replaced by Mudgeeraba Auto Electrical on the Christmas trip. the old one was truly shagged, and now my battery is not to healthy :)
Last edited by packeteer on Wed, 13 Jul 2016 12:33 +0000, edited 1 time in total.
2011 Dual Cab SR5 D4D manual.
build thread
shed page
User avatar
packeteer
 
Posts: 3468
Joined: Wed, 27 Apr 2011 1:49 +0000
Location: Chatswood, Sydney

Re: Zed's shed!!

Postby rds_929 on Sat, 16 Jan 2016 6:59 +0000

awsome build up mate it has came so far from when you first bought it. just wondering what suspension height your at the minute and what recovery points you have cheers

Ryan
rds_929
 
Posts: 402
Joined: Mon, 01 Jun 2015 6:26 +0000
Location: melbourne , victoria

Re: Zed's shed!!

Postby packeteer on Sat, 16 Jan 2016 10:06 +0000

hey mate, it's put together by Ultimate Suspension. 3" front 2" rear

recovery points are all Buds Customs
2011 Dual Cab SR5 D4D manual.
build thread
shed page
User avatar
packeteer
 
Posts: 3468
Joined: Wed, 27 Apr 2011 1:49 +0000
Location: Chatswood, Sydney

Re: Zed's shed!!

Postby rds_929 on Sun, 17 Jan 2016 6:16 +0000

awsome thanks heaps bud be talking with them about a kit. did you extend brake lines and have to do diff drop ?? cheers
rds_929
 
Posts: 402
Joined: Mon, 01 Jun 2015 6:26 +0000
Location: melbourne , victoria

Re: Zed's shed!!

Postby packeteer on Thu, 21 Jan 2016 12:00 +0000

yes I am running extended braided lines, and Monster Rides diff brackets
2011 Dual Cab SR5 D4D manual.
build thread
shed page
User avatar
packeteer
 
Posts: 3468
Joined: Wed, 27 Apr 2011 1:49 +0000
Location: Chatswood, Sydney

Re: Zed's shed!!

Postby rds_929 on Thu, 21 Jan 2016 5:13 +0000

legend cheers bud
rds_929
 
Posts: 402
Joined: Mon, 01 Jun 2015 6:26 +0000
Location: melbourne , victoria

Re: Zed's shed!!

Postby Richolux150 on Wed, 24 Feb 2016 7:29 +0000

Hey Pack,
Seeking to draw on your experience...... :) :) :)
I was thinking about putting some 285/75-16 Nitto Trail Grapplers on my 2012 rig and was just wanted to know how your set up is working with the 295's and the +15 off set........I've got a 3" lift and Super pro adjustable UCA's so similar to your set up........probs go a +20 off set tho, just because it's easier to source in a 16. ;) ;) ;)

Epic build thread BTW........wish I never read that stuff from 1kd performance though :shock: :shock: :shock: .....now I want that gear too...... :? :? :?
Cheers Richo
If cat turds were Gold nuggets, I'd be the richest bloke on the block... :lol: :lol: :lol:
User avatar
Richolux150
 
Posts: 662
Joined: Mon, 25 Mar 2013 8:39 +0000
Location: The Goldy

Re: Zed's shed!!

Postby packeteer on Fri, 11 Mar 2016 8:47 +0000

Richolux150 wrote:Hey Pack,
Seeking to draw on your experience...... :) :) :)
I was thinking about putting some 285/75-16 Nitto Trail Grapplers on my 2012 rig and was just wanted to know how your set up is working with the 295's and the +15 off set........I've got a 3" lift and Super pro adjustable UCA's so similar to your set up........probs go a +20 off set tho, just because it's easier to source in a 16. ;) ;) ;)

Epic build thread BTW........wish I never read that stuff from 1kd performance though :shock: :shock: :shock: .....now I want that gear too...... :? :? :?


hey mate, sorry I haven't replied sooner, no email from the forum and I dont check this thread often.

the Nittos are great, but +15 is too positive, it scrubs on the chassis front and rear. 0 would be a better choice.
even with that offset, I've had to chop a fair bit out of my guards
2011 Dual Cab SR5 D4D manual.
build thread
shed page
User avatar
packeteer
 
Posts: 3468
Joined: Wed, 27 Apr 2011 1:49 +0000
Location: Chatswood, Sydney

Re: Zed's shed!!

Postby packeteer on Fri, 11 Mar 2016 8:54 +0000

anyway, quick update.

had 110km service done recently, had a low km Toyota cv put in to replace the one I broke over Christmas. Also replaced both front diff seals and the steering rack (again!). It was only replaced 12 months ago, thankfully it came with 18 months warranty, but there's still a few hours labour charge not included. bloomin expensive exercise this! :(
2011 Dual Cab SR5 D4D manual.
build thread
shed page
User avatar
packeteer
 
Posts: 3468
Joined: Wed, 27 Apr 2011 1:49 +0000
Location: Chatswood, Sydney

Re: Zed's shed!!

Postby Richolux150 on Sat, 12 Mar 2016 6:19 +0000

Cheers Pack
Yep I was leaning towards the zero......
Cheers Richo
If cat turds were Gold nuggets, I'd be the richest bloke on the block... :lol: :lol: :lol:
User avatar
Richolux150
 
Posts: 662
Joined: Mon, 25 Mar 2013 8:39 +0000
Location: The Goldy

Re: Zed's shed!!

Postby packeteer on Sat, 12 Mar 2016 6:28 +0000

packeteer wrote:anyway, quick update.

had 110km service done recently, had a low km Toyota cv put in to replace the one I broke over Christmas. Also replaced both front diff seals and the steering rack (again!). It was only replaced 12 months ago, thankfully it came with 18 months warranty, but there's still a few hours labour charge not included. bloomin expensive exercise this! :(


correction, the mechanic pulled the rack out and it was only weeping, so he put it back in :(
2011 Dual Cab SR5 D4D manual.
build thread
shed page
User avatar
packeteer
 
Posts: 3468
Joined: Wed, 27 Apr 2011 1:49 +0000
Location: Chatswood, Sydney

Re: Zed's shed!!

Postby packeteer on Wed, 13 Jul 2016 11:05 +0000

So last week I went to start the car for the first time since winter high country trip (3 weeks ago), and it would not go. After charging the battery, it still wouldn't turn over. So a roll start was tried with success.

Seems my starter has seized, so I've ordered an ebay replacement.

Also, I must have got some water in the cab with all the river crossings, so it STINKS!!! :cry:
2011 Dual Cab SR5 D4D manual.
build thread
shed page
User avatar
packeteer
 
Posts: 3468
Joined: Wed, 27 Apr 2011 1:49 +0000
Location: Chatswood, Sydney

Re: Zed's shed!!

Postby aandy on Wed, 13 Jul 2016 12:20 +0000

Have you had the starter out for a look? it is very easy to open and clean contacts etc..
I had mine our while rolling around in 6" bulldust as the contacts where full of mud.
User avatar
aandy
 
Posts: 951
Joined: Sat, 07 May 2011 3:35 +0000
Location: Bali

Re: Zed's shed!!

Postby packeteer on Wed, 13 Jul 2016 12:31 +0000

aandy wrote:Have you had the starter out for a look? it is very easy to open and clean contacts etc..
I had mine our while rolling around in 6" bulldust as the contacts where full of mud.


Only had a brief look so far, will pull it all apart this weekend. Either way, I'll have a spare :)
Cheers mate
2011 Dual Cab SR5 D4D manual.
build thread
shed page
User avatar
packeteer
 
Posts: 3468
Joined: Wed, 27 Apr 2011 1:49 +0000
Location: Chatswood, Sydney

Re: Zed's shed!!

Postby TOYZX on Wed, 13 Jul 2016 2:59 +0000

I bet it's just the solenoid all corroded! Takes ten mins and $0 to fix.

Sent from my SM-N920I using Tapatalk
User avatar
TOYZX
Moderator
 
Posts: 2919
Joined: Wed, 08 May 2013 7:58 +0000

PreviousNext

Return to Member Build Ups

Who is online

Users browsing this forum: No registered users and 5 guests