Well installed my Limmited Edition Runva 11XP this weekend.
I was going to mount the control box under the bonnet but after playing around with brackets and all I wasn't happy with the strength and longevity of it so I went searching for a new location (didn't want it in the middle of the bull bar), after some looking around I ended up mounting it in the wing of the bull bar there is a bracing rail that goes through with some holes drilled at the perfect size for the M5 nutsert and M5 bolt that came with the winch (unfortunately they where the wrong spacing so had to drill one hole).
Anyway after spending $100 for cable thinking it was going under the bonnet I didn't need any of it but happy with the final outcome.
Added some 40mm spacers to the back of the fairlead so pulling up a steep slope wasn't an issue.
Also a couple of weekends ago I modified my lightbar brackets so it can sit lower after Boxheads advice.
Now there is no difference to intercooler temps between lightbar on or off.
I really need to get around to fitting my lift its been in the shed since begging of December.
Also made my roof console just trying to find some felt to cover it in if anyone knows a good place around Adelaide for me it would be very helpful Spotlight doesn't have the right grey so still looking when its done I'll move my spotlight switches to the console and get some winch controls in cab.