rudolf wrote:Hi Squid_87,
This question is a bit off topic but did you get noticable power and/or torque when you fitted the 3" exhaust and snorkel?
dolphin wrote:i have the same problem. mine is hilux vigo 3.0 D4D. but when i drive 160 km/h the engine light up warning and lose power... i take to toyota dealer they clean the manifold and change the fuel injector. it cause me a lot already but it still appears... i also looking for forward what to do next........
Hiluxboy wrote:Hi everyone, I have a question for all of you out there and wondering if this has happened to anyone else and what the problem could be
I have a 2006 T/D auto KUN26R with 83000ks on the clock. Recently it has developed a nasty habit of when overtaking loosing all power, going into limp mode and the malfunction indicator light coming on (the one that looks like an engine). It was due for the 80000k service so booked it in with Toyota in Cairns.
They connected it to their scan tool and came up with an error code of P2008 - 'Intake manifold runner control' from the ECU.
Toyota cleaned the manifold runner control valve and cleaned all connectors as well as the filters on the solenoids.
The fuel filter was quite dirty so was replaced. Thinking that this should of fixed the problem, but it happened again Taking it back and still finding the same error code, and after discussions with head office in Melbourne, Toyota replaced one of the solenoids which may have been at fault (it was very badly clogged with dust before cleaning it out).
Since all this has been done, the same problem occurred today in the exact same bit of the highway whilst overtaking a semi-trailer!!
Has this error code or problem ever happened to anyone before Its getting quite frustrating as I dont know when its going to happen (only seems to do it when travelling at 100kph and go to overtake) and makes me second guess myself for when I want to overtake another vehicle.
Has anyone got any ideas? After all this, maybe I'm thinking it could be an injector faulty??? The engine is standard with no power chip but with an aftermarket 3" exhaust. Can anyone help please?
Users browsing this forum: No registered users and 8 guests