10 Luxxxx build.

Want to show off what you've done to your rig? or have a custom project to show? Post it up here!

10 Luxxxx build.

Postby 10 luxxxx on Fri, 20 Jul 2012 8:18 +0000

G'day all just finished changing all my suspention over thought I would start a build thread for anyone interested.
This is the Rancho add a leaf 3rd from the bottom very easy to install and a cheap way of getting that extra bit of lift.
Along with the Rancho rs 5000 shocks there is much less body roll and obviously feels so much better than the stock setup.

Image
Before the add a leaf

Image
After add a leaf
Image

The front end with the lovells springs I do not rate them at all as they had sagged within a couple of months
I know most are not fans of the ironman gear but I thought I would give them a chance and I managed to get them for a good price. It's only been a day since I put all of this in but I am happy so far.

Image


And after with the ironman gear.
Image
I will put up some more from a distance tomorrow but I now have 3" in the front and 2" in the rear.

And some of my other mods you may have seen earlier
Image
Image
Image
Image

Next up some bigger tyres and at least one locker. Probably in the front first.

I have retro fitted my roof rack to fit my hard lid i was not to keen on it on the roof just a temporary thing until I have some coin for a canopy.
Image
Image
Image
The only thing that ever goes on there is the maxx tracks swag
It's not for everyone I know but should work well
Last edited by 10 luxxxx on Mon, 10 Jun 2013 5:40 +0000, edited 7 times in total.
User avatar
10 luxxxx
 
Posts: 1507
Joined: Mon, 19 Dec 2011 12:37 +0000
Location: Perth


 

Re: 10 Luxxxx build add a leaf

Postby RonBacardi8 on Fri, 20 Jul 2012 9:16 +0000

Hey mate, that second last photo there is an air filter in the top right corner. Is that a diff breather?

IF it is a diff brether and If its for the rear diff you may want to test it, I had one the exact same and it didn't do anything apart from stuffing air flow to the rear diff locker. I ended up coiling the breath hose and stuffing it high between the canopy and rear window. Anyways if it isn't for a diff breather then I just babbled crap for about 2 mins :oops: :roll: .

Btw check my website about front locker vs rear locker it may help you make up you mind.
http://www.4-wheeling-in-western-austra ... ckers.html

Cheers Ronny.
User avatar
RonBacardi8
 
Posts: 1409
Joined: Fri, 11 Feb 2011 7:05 +0000
Location: Perth

Re: 10 Luxxxx build add a leaf

Postby 10 luxxxx on Fri, 20 Jul 2012 11:28 +0000

G'day mate yeh it is for the rear diff I'm waiting on a proper kit to arrive so that should sort it out. Cheers for the link.
User avatar
10 luxxxx
 
Posts: 1507
Joined: Mon, 19 Dec 2011 12:37 +0000
Location: Perth

Re: 10 Luxxxx build add a leaf

Postby jakelux on Sat, 21 Jul 2012 3:59 +0000

looking good mate, i like the net behind the seat ;)

What rate Lovells did you have? and how long where they in? I have heard OK things about ironman suspension.

10 luxxxx wrote:G'day mate yeh it is for the rear diff I'm waiting on a proper kit to arrive so that should sort it out.
Cheers for the link.


Only problem with paper type breathers is if they get wet they clog up and cease to breath.
User avatar
jakelux
Moderator
 
Posts: 2582
Joined: Mon, 12 Oct 2009 5:38 +0000
Location: MELBOURNE, AUSTRALIA

Re: 10 Luxxxx build add a leaf

Postby 10 luxxxx on Sat, 21 Jul 2012 9:28 +0000

The lovells were heavy duty with a contant load rating to alow for the roo bar I have forgotten the part number but they were only in for 3 months and didn't hold up at all. A mate of mine has the same setup I had with lovells and has the same problems and it's only been in for 2 months.
I hope to get out for a drive later but so far the ironman in the front end is working well and I am happy and also the price $590 for the springs and struts lots of people say you get what you pay for but I am happy to give them a chance / test.
User avatar
10 luxxxx
 
Posts: 1507
Joined: Mon, 19 Dec 2011 12:37 +0000
Location: Perth

Re: 10 Luxxxx build add a leaf

Postby Jimlux00 on Sat, 21 Jul 2012 10:55 +0000

I like the sound of your suspension setup, does it get rid of the nose dive look with a steel bull bar? Could you post up a pic from the side?
Cheers, jimmy
User avatar
Jimlux00
 
Posts: 35
Joined: Sat, 10 Mar 2012 4:54 +0000

Re: 10 Luxxxx build add a leaf

Postby 10 luxxxx on Sat, 21 Jul 2012 11:52 +0000

Image
User avatar
10 luxxxx
 
Posts: 1507
Joined: Mon, 19 Dec 2011 12:37 +0000
Location: Perth

Re: 10 Luxxxx build add a leaf

Postby 10 luxxxx on Sat, 21 Jul 2012 11:53 +0000

Yep it does indeed I love it so far. :D
User avatar
10 luxxxx
 
Posts: 1507
Joined: Mon, 19 Dec 2011 12:37 +0000
Location: Perth

Re: 10 Luxxxx build add a leaf

Postby 02agro on Sat, 21 Jul 2012 4:30 +0000

looking good mate i just did my rear seat mod 2day great for more storage i'll have to hunt around for the net sometime through the week... custom slidders next? would suit it nicely!
* ex Hilux owner
*gq patrol with the works
* GOAT project rock crawler
User avatar
02agro
 
Posts: 195
Joined: Sun, 01 Apr 2012 4:17 +0000
Location: cronulla

Re: 10 Luxxxx build add a leaf

Postby 10 luxxxx on Sat, 21 Jul 2012 4:50 +0000

Thanks mate yeh my sliders are in the process at the moment my brother happens to be a boily so it's about time I hit him up for a favour also a good reason for him make a set for his own hilux.
User avatar
10 luxxxx
 
Posts: 1507
Joined: Mon, 19 Dec 2011 12:37 +0000
Location: Perth

Re: 10 Luxxxx rhino rack on my hard lid

Postby 10 luxxxx on Wed, 25 Jul 2012 3:15 +0000

And a cut out so my fridge will fit still to be finished off.
Image
User avatar
10 luxxxx
 
Posts: 1507
Joined: Mon, 19 Dec 2011 12:37 +0000
Location: Perth

Re: 10 Luxxxx rhino rack on my hard lid

Postby Jimlux00 on Sun, 29 Jul 2012 7:40 +0000

I think I may order the add a leaf this week. I just hope the ride won't be too stiff as I will rarely carry much load, probably just the dirtbike and camping gear every now and then. Will this be fine with a 2 inch tough dog lift in the front?
User avatar
Jimlux00
 
Posts: 35
Joined: Sat, 10 Mar 2012 4:54 +0000

Re: 10 Luxxxx rhino rack on my hard lid

Postby 10 luxxxx on Sun, 29 Jul 2012 7:58 +0000

I find the ride just fine mate no worse than stock and less body roll with your lift will be fine I already had 2 inch lift in the front before doing the add a lift and it raised the rear about 50mm
User avatar
10 luxxxx
 
Posts: 1507
Joined: Mon, 19 Dec 2011 12:37 +0000
Location: Perth

Re: 10 Luxxxx build

Postby 10 luxxxx on Tue, 28 Aug 2012 2:31 +0000

Small update but a good one to do these bump stops make a heap of difference.
Thanks Matt / monster rides.
Image
User avatar
10 luxxxx
 
Posts: 1507
Joined: Mon, 19 Dec 2011 12:37 +0000
Location: Perth

Re: 10 Luxxxx build

Postby 10 luxxxx on Tue, 28 Aug 2012 7:46 +0000

Image
User avatar
10 luxxxx
 
Posts: 1507
Joined: Mon, 19 Dec 2011 12:37 +0000
Location: Perth

Re: 10 Luxxxx build

Postby 10 luxxxx on Fri, 14 Sep 2012 12:21 +0000

Finally got round to installing my redarc dbi12 today you've seen them all before but this is mine
Image
And the link button and led
Image
User avatar
10 luxxxx
 
Posts: 1507
Joined: Mon, 19 Dec 2011 12:37 +0000
Location: Perth

Re: 10 Luxxxx build

Postby lais817 on Tue, 25 Sep 2012 6:50 +0000

Hey mate, nice build, I like the look of the roof rack on the hard lid, I don't think I've ever seen that before! Any chance of a photo of how you've mounted your compressor behind the rear seat? I want to do the same but I'm not sure on how to fix it to the floor/back wall. :roll:

Thanks
Ash
Insert witty comment here

Check out my Build: viewtopic.php?f=41&t=11921
User avatar
lais817
 
Posts: 739
Joined: Thu, 07 Oct 2010 10:39 +0000
Location: Geelong VIC

Re: 10 Luxxxx build

Postby Loosey on Tue, 25 Sep 2012 7:21 +0000

Loving the build mate, looks schmick!
Aaron

Introductory Thread | My Shed | My Build
2007 Silver SR5 D/C D4D Upgrade
User avatar
Loosey
 
Posts: 2391
Joined: Sat, 18 Aug 2012 2:55 +0000
Location: Newcastle

Re: 10 Luxxxx build

Postby 10 luxxxx on Tue, 25 Sep 2012 9:02 +0000

lais817 wrote:Hey mate, nice build, I like the look of the roof rack on the hard lid, I don't think I've ever seen that before! Any chance of a photo of how you've mounted your compressor behind the rear seat? I want to do the same but I'm not sure on how to fix it to the floor/back wall. :roll:

Thanks
Ash


G'day mate my compressor is a bushranger with the base plate on it all I have done is drill a hole in it and bolt it down through one of the child seat anchor points I will get a photo up but it's not to technical at all.
I like having the roof rack on the hard lid the main reason is to carry my recovery gear, maxx tracks and swag I was sick of getting mud and crap over all the gear in the tub and didn't want them on the roof as I have lights on the sports bar. I'm trying to come up with a way to make them a bit more sturdy to carry a bit more weight if anyone has any ideas.
User avatar
10 luxxxx
 
Posts: 1507
Joined: Mon, 19 Dec 2011 12:37 +0000
Location: Perth

Re: 10 Luxxxx build

Postby 10 luxxxx on Tue, 25 Sep 2012 9:09 +0000

Loosey wrote:Loving the build mate, looks schmick!


Thanks mate I hope to get my sliders finished in the next couple of weeks and have asked Santa / the wife for some 33s for Chrissy fingers crossed. She already complains every time she climbs in but it has to be done I think it looks a little silly with 31s
User avatar
10 luxxxx
 
Posts: 1507
Joined: Mon, 19 Dec 2011 12:37 +0000
Location: Perth

Next

Return to Member Build Ups

Who is online

Users browsing this forum: No registered users and 33 guests