Alloy 17" wheels for 2012 model sr5

[saab463]

I am taking delivery of a 2012 SR5 Dual cab later this week and am looking to change the original wheels.
Have looked at the range from Allied,CSA and Mickey Thompson, but quite frankly, dont like any of them.
Anyone have any other suggestions?

[scottsr20]

Check out some of the US wheel sites - KMC, Moto metal, Pro Comp etc.and pm monster rides - Matt has access to TRD wheels from the US only models - some of the best lookin wheels going if you ask me.

[helmut79]

Tempe Tyres in Sydney have Ballistic and Taleb Tyres in Sydney have Fuel wheel all very nice selections in 17".

[weeman]

Hey mate..

Im in the same boat as you im just waiting for my ABN to come through to put the vehicle under.. So hopefully next week i get my 2011 Hilux Sr5..

Im considering getting these wheels,

http://www.methodracewheels.com/products/

very good quality, a friend of mine in the states knows the owner i wont get the race versions but the street wheels do look pretty cool and fairly decent priced, and shipping for about 5 rims is about 400 - 500 us.. air freight...

My only question is what back spacing are people running, I want the wheels to have more of a standard offset i.e. the truck a bit of stance any recommendations?

Also going to probably run 3" lift with 265/75/17 would love to run 285/75/17 however Ive heard with a 3" lift It wont be enought

[helmut79]

Hey mate..

Im in the same boat as you im just waiting for my ABN to come through to put the vehicle under.. So hopefully next week i get my 2011 Hilux Sr5..

Im considering getting these wheels,

http://www.methodracewheels.com/products/

very good quality, a friend of mine in the states knows the owner i wont get the race versions but the street wheels do look pretty cool and fairly decent priced, and shipping for about 5 rims is about 400 - 500 us.. air freight...

My only question is what back spacing are people running, I want the wheels to have more of a standard offset i.e. the truck a bit of stance any recommendations?

Also going to probably run 3" lift with 265/75/17 would love to run 285/75/17 however Ive heard with a 3" lift It wont be enought

If you want to run a factory offset of p30 to p20 then a 265 or 32" is your option.

If you go for a p10 - p14 a 285 with trimming will work with a 3" lift

[turbodiesel]

How much do you want for the wheels that are coming off your ute??

[Lot781]

i took delivery of my updated hilux sr5 and like my rims are you interested in selling your old ones?

[aandy]

I would like to buy one alloy wheel if anyone wants to sell one only for any reason.
I want to rotate 5 tyres but the spare is steel.
2012 model SR5 17"

[wholehog]

I would like to buy one alloy wheel if anyone wants to sell one only for any reason.
I want to rotate 5 tyres but the spare is steel.
2012 model SR5 17"

u have a 2012 sr5 and it only comes with a steel spare..... How crap is that....my 2010 has a spare 17 inch alloy

[Craig Racoon]

Hi all

I am new to the site and hope that you can help. I have orded some Moto metel rims for my 2012 hilux but am very confused as to what offset they are the guys said to me that it will work they are -12 off set 17x9"
I want to run 285/70/17 bfg km2 tyres and I am having 3" lift done to my truck

[kyle300exc]

Have a read through this thread viewtopic.php?f=27&t=3538&hilit=33inch+tyre+thread

[helmut79]

Hi all

I am new to the site and hope that you can help. I have orded some Moto metel rims for my 2012 hilux but am very confused as to what offset they are the guys said to me that it will work they are -12 off set 17x9"
I want to run 285/70/17 bfg km2 tyres and I am having 3" lift done to my truck

Would seem with a -12 off-set and a 9" rim, you will be cutting the body mount and doing allot of trimming. Will give a wide stance though once you get them to work

[Atomik75]

Hi all

I am new to the site and hope that you can help. I have orded some Moto metel rims for my 2012 hilux but am very confused as to what offset they are the guys said to me that it will work they are -12 off set 17x9"
I want to run 285/70/17 bfg km2 tyres and I am having 3" lift done to my truck

Hi mate, I have 20x9 Pro Comps in a positive 6 offset with 305x55x20s...i have mildly trimmed the body mount, the front bar and some out of the rear of the flair. I do have MR upper control arms...with out these I would have hit the stock control arms for sure. Im just hitting on the sway bar on full lock but not anywhere else (full compression is yet to be tested so the pinch weld will be an issue i think). Based on the experience of setting mine up i think somewhere around a 0 offset on the 9 inch rim would have worked well. I believe you will find the -12 on the 9 inch rim is going to require a fair chunk out of the body mount....this is only my experience. I think tyre choice will play a part as I'm told for example the Mickey Thompson are a bit narrower than other etc.

My rim/tyre sits a fair bit outside the wheel arch so an extra 18mm is going to have them out there for sure!

In any case good luck with it and enjoy it.

[Craig Racoon]

Thanks

Will let you guys know how the build goes, Cant wait!!!! pics to before and after

Cheers

[DAVE07]

Pics of these updates? I take delivery in May 2012 and would like to get some ideas!!

[Craig Racoon]

I did the lift and all went well had to do few extra things

Here is list of things that I did and the pics are after did the job it cam out good and still looks like a toyota

1) Nudge Bar
2) Rock Sliders
3) Roll Bar
4) Full Black Leather interior
5) Reverse camera (for the wife)
6) 4.5 inch lift by toytec and bilstein shocks
7) 305/65/R17 ATZ Mickey tompson tyres
8) 17x9 inch ATX justice 184 rims
9) Duel battery sytem
10) ARB canopy
11) Skid plates under
12) KC spot lights
13) National luner 90L frider/frizzer
14) Power chip
15) 0.5 inch front diff drop
16) 0.5 inch sway bar drop
17) Angle wedge to change the back diff angle
18) Moved the back diff 0.25 inch forward
19) Modified the flares on the front wheel arches

Cheers Craig

[DAVE07]

THATS PHAT! Do you know how wide/ big a wheel you can go without lifting ?

[Craig Racoon]

On the standard rim you can only go with 265/75/17 and then you are pushing it, as the inside of the wheel arches are very close to the bigger tire that Toyota has put on the new hilux as standard tyre that comes on the truck is 265/70/17

It would be best to go for a lift as it solves lots of articulation problems. You dont have to do it as extream as others but it is better

[SR5DAZ]

Hey, pretty new to this site but Ive got a 2012 sr5 dual cab with a 2 inch lift. I want to get new rims tyres for it but not on what I can get and what measurements I need, what sort offset I have to get and what the maximum I can go is. Any help would be greatly appreciated

[JYELUX]

I am taking delivery of a 2012 SR5 Dual cab later this week and am looking to change the original wheels.
Have looked at the range from Allied,CSA and Mickey Thompson, but quite frankly, dont like any of them.
Anyone have any other suggestions?

G'day,

im actually looking for another set of rims for my camper, if u want to unload the original alloys, i might be interested.

Cheers