I needed a work car but me being me cant just leave a good car standard
I wanted a stereo That would work within a few parameters. I wanted it loud but SQ always comes first with me...
1 it had to be stream line enough to not get in the road of my work.
2 I needed the third seat... (for my boy)
3 Needed to be clear but loud. Oh and it has to go low!!!!!!!!!!!!!!!!!!!!!!!
4 Oh and look good of course.
gear is as followed...
0 and 4 gauge power cable
950 CCA lead acid low maintenance battery
stinger RCAs
Blaupunkt IVDM-7003 indash single din screen replaced now with a Kenwood - KVT534DVD 7 INCH unit.
NOW: PIONEER ODR RS-K1/C-100/C-200/RS-P50/RS-P1
Blaupunkt VPA-172 splits and 6.5" and second set of drivers for midbass
Blaupunkt VPW-480 18" sub
Fusion FJL-1211D mono amps x 2
Fusion FJL-4011 4 channel
Audio Control Epic-160/(3.1 I am adding later)
6x1.4m of sound deadening
Oh and lots of Glass
Have now removed Car PC...
Oh shit I forgot my car PC These are some of the basic specs:
CPU - x86 family 6 model 14 stepping 8 intel 1.83 GHz core 2 duo
HDD - Laptop 7200 rpm 80 gig
RAM - 2 gig (single)
OPP - W7 32bit and using Centrafuse 3.
http://www.cnet.com/products/aopen-minipc-duo-mp945-vxr/CNX-P1900 dual output 140 WATT intelligent DC-DC power regulator
Non Stereo stuff:Done so far... 5% Tint. Headlights and taillights and folding chrome mirrors with indicators. Chrome grill (facelift) + facelift front bar and spotlights. Removed mesh from front bar.Tubed style-side and flared front guards for wider tyres, Detroit Locker (not truetrac) Supra 4 pot calipers and rotors, Superpro custom sway-bar, Hopper Stopper rear disc and caliper kit, King leaves and Front springs, Bilstein rear shocks, braided brake-lines and FM Intercooler. Quick shift kit (trans). Sticker kit. Cut Alloy deck lid in half and put in hinge. Drill holes it it to fit alloy sports bar. Bonnet struts.
Waiting on... Billet cams, TRD Supercharger + fitting kit from states. High Boost Pulley 2 psi. Extractors (twin pipe with QTP electronic cutouts with Redback mufflers). Xede twin map ECU. Diesel bonnet = Will swap Carbon Fiber bonnet plus cash if anyone wants one. Replacing front seats or re-trimming them. Maybe some more interior parts carbon printed.
Have new 2014 styleside tub and roll bar to swap over with old unit (cracks showing it tub).
I'll start with the ute.Its a Toyota Hilux SR Dualcab 4l V6 petrol.
Started like this- here its got 5% window tint, deck lid and 4" King Springs lowering kit. Oh and also signage. Plus I'd cut off the roll bar...