Show us your Rock Sliders

[amitch888]

If you want to use the basic bender and prevent the dints, just grab some tube large enough to slide over what ever your working on, make it a very loose fit and only an inch or so long so it slides back off after doing the bend. Sit these where the the two dints usually occur. Prevents the dints, works every time for me on those jobs when I want a neater finish

[Ut3dog]

Here r my custom made sliders with side rail. They r cut and welded and have been painted hammer tone along him my arb winch bar. Tested them out and r rock solid!!

[SRD4D]

Got these on the truck now,just got to fits some alloy tread plate so the kids dont fall threw the gap,but they will do there intended job in the bush.

[granta8082]

Did you make these up yourself??

[anthony kemp]

home made heavy duty rock sliders

[blkrota]

Here r my custom made sliders with side rail. They r cut and welded and have been painted hammer tone along him my arb winch bar. Tested them out and r rock solid!!

Duuuude , Hands down the tuffest sliders on newhilux,
i want them so much, willing to pay if you want make another set

[Ut3dog]

A mate of mine made them for me. He's very good with a welder but he is also a farmer and is always busy with work and other projects. Sorry mate

[SRD4D]

Did you make these up yourself??

yep

[kyle300exc]

Nice work fellas ut3dogs on the money with the sidebars IMO. Will be starting mine very soon similar to this.

[Prescott]

[Blackie2008]

Looks neat

Is it illegal to modify your chassis by welding it or drilling into it?

[SRD4D]

Looks neat

Is it illegal to modify your chassis by welding it or drilling into it?

its your chassis you do what you want with it.

i wouldnt weld to my chassis though

[Loosey]

Looks neat

Is it illegal to modify your chassis by welding it or drilling into it?

its your chassis you do what you want with it.

i wouldnt weld to my chassis though

I think Dan is asking would it affect the legality of the vehicle being on the road.

[ScotsMan]

my custom sliders mated to arb scrub rails

ImageUploadedByTapatalk1368872181.943388.jpg

ImageUploadedByTapatalk1368872435.063976.jpg

[jakelux]

Prescott thats an awesome way to mount them, so you've welded a plate to the chassis with threaded holes in it then bolted the slider to them?! Brilliant

[SRD4D]

Looks neat

Is it illegal to modify your chassis by welding it or drilling into it?

its your chassis you do what you want with it.

i wouldnt weld to my chassis though

I think Dan is asking would it affect the legality of the vehicle being on the road.

yeh i know mate,
Im sure they could pin something on you if they really wanted too, bloody government always want there hand in our pie, cashing in on everything we spend our hard earnt on.

[Loosey]

yeh i know mate,
Im sure they could pin something on you if they really wanted too, bloody government always want there hand in our pie, cashing in on everything we spend our hard earnt on.

Yep, same with having to get council approval to put something as small as a garden shed up on your property... That you're paying, or have payed for...

[SRD4D]

yeh i know mate,
Im sure they could pin something on you if they really wanted too, bloody government always want there hand in our pie, cashing in on everything we spend our hard earnt on.

Yep, same with having to get council approval to put something as small as a garden shed up on your property... That you're paying, or have payed for...

yeh red tape gets in the way of all our fun.
id go a row of s#%thouses if the council knocked on my door.

[Prescott]

I haven't drilled any holes into the chassis there just plates that are drilled and tapped then welded onto the chassis. As far as I'm aware it's legal this way your just not allowed to weld the sliders directly to the chassis.

[SRD4D]

ok,i forgot to add the finished result,tread plate fitted so the kids dont fall through them.
nothing flash but functional