NewHilux.net

Hi guys,
I recently bought some Angel Eye headlights off ebay but they don't seem to fit https://rover.ebay.com/rover/0/0/0?mpre ... 2428362265.
I'm just curious is there a trick to installing them, am I missing something really obvious?
The plastic behind the low beam seems to be intefereing with the sheet metal directly above the light, to the point that I can't get the top mounting brackets to reach where they should.

(click on images for full pic, they appear to be cropped)

Very interested also to see the solution to this. they are selling at a good price.

"LEFT & RIGHT SET OF ANGEL EYE HEADLIGHTS TO SUIT A TOYOTA HILUX 2011-2015"

thats from the ebay add.

Since you posted in gen 8 section of the forum I persume you have gen 8 car. Just checking if the lights fit your actual vehicle mate?

grunf wrote:"LEFT & RIGHT SET OF ANGEL EYE HEADLIGHTS TO SUIT A TOYOTA HILUX 2011-2015"

thats from the ebay add.

Since you posted in gen 8 section of the forum I persume you have gen 8 car. Just checking if the lights fit your actual vehicle mate?

Looks like I posted in the wrong section, it's a 2013 Hilux, my bad.

Moved to Gen 7 Section

Check your bullbar fitting instructions.
I fitted new headlights when I fitted my MMC bar & there is a small plastic tan under the light housing that needs to be removed.
Mite be it

Sent from my SM-G930F using Tapatalk

DeadlyBeast wrote:Moved to Gen 7 Section

Thanks for that.

tazmancrash wrote:Check your bullbar fitting instructions.
I fitted new headlights when I fitted my MMC bar & there is a small plastic tan under the light housing that needs to be removed.
Mite be it

Thanks for that, I'll check it out.

I did manage to get them to fit, but I've really had to jam them in there, and there's no access to the highbeam bulbs now because the cover is pushed up hard against the sheet metal of the car.