I've just bought a Runva 11XP and just got my winch cradle today from toyota ($192.50 inc GST so not cheap)
Looks to be a really solid plate, plus the reinforcement on the plate locks nicely against the bar. it mounts vertically into the bar but will leave the fairlead mounted back into the bar. You could put a second one but i'm going to run it with the single fairlead on the plate rather than modifying the bar, though i am planning to mount the winch so it spools out over the top of the drum which i think is technically completely flipped from the "normal" way.
The Runva is a synthetic rope so it came with a hawse, i bought the offset hawse at the time and i'd say that is a requirement if you want to mount the hawse onto the cradle mount (where holes are provided for it).
I'm going to run up a build thread for my lux and throw some pretty comprehensive pictures, part numbers etc in to save anybody else guessing as this has been extremely hard to find any solid info on....
EDIT: I'll link the build thread here once i have created it, also i really should do an intro thread
EDIT 2: If anybody is interested, i got the runva from torq4x4 on sale from $650 to $589, i happened to be in the area so i bought it locally, they had the red runva with blue synthetic, or the black runva with the red synthetic (which wolf4x4 claimed was limited to them, maybe it was at some point but not any more apparently). Both come wth the wireless controlller, synthetic rope and a snatch block, plus a neoprene winch cover wihch wont be very useful to me, maybe occasionally, i'll see how it goes once its installed.
EDIT 3: Link removed to adhere to the forum rules, if you want to find it you can google it or PM me, easy enough to find.
EDIT 4: You can find my build thread with extra details here:
viewtopic.php?f=41&t=24276