Pocket style flares

[farono]

Hey all. pretty sure I'm posting in the right spot. searched everywhere but can't find anywhere in aus to get a set of pocket style black textured flares for an sr5. Any help would be greatly appreciated

[packeteer]

never heard of them, maybe some pics or web links would help

[stu243]

http://www.autoanything.com/fender-flar ... 4A0A0.aspx
http://a.cdnbrm.com/images/products/rel ... tundra.jpg

Is that what you meant?

Can't find an Aussie site in a quick check.

[Loosey]

cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=181020700661#ht_5824wt_1289

[farono]

Loosey cheers mate exactly wat I was looking for seen some from uk but was $500 for just 2

[Loosey]

No prob mate, have these on my watchlist on eBay, lol

[crazy_1_96]

hey mate, I have them fitted to my ute, if its a dual cab you will need an angle grinder and some more fiberglass to make them fit reasonable. I was not overly happy with the fitment/strength/quality but they have grown on me since fitting them.
search jungle fender flares. $350 aud delivered for 4. I bought them as they are wide as and i dont like flexi rubber. Im running -22 and that only just fills them so any less and they might look a bit dicky. My 2c, hope it helps

[crazy_1_96]

just got photobucket sorted

[Loosey]

Nice mate, what offset rim and what size tyre?

[crazy_1_96]

cheers loosey, -22 16x8 285 75 16

[Loosey]

I've got some -13 15x8's in my shed... *ponders*

How do they go when you compress a wheel up into the guard, do they rub on your quarter panels?

[Stef]

just got photobucket sorted

That looks insane!

[crazy_1_96]

I've got some -13 15x8's in my shed... *ponders*

How do they go when you compress a wheel up into the guard, do they rub on your quarter panels?

quarters yes, grinder fixed it though, everything else, no at this stage (bodymount chop obviously) but i havent given it a good workout as time has gotten away from me over the past couple of months. My list of plans is huge so end of the day it will be fine. Grinder needs to come out though.

[Loosey]

Are you running a lift at all? I read through your build thread and didn't see mention of it.

[dano85]

How did you glass up the fenders? Did you have to paint again or was in minimal?

[crazy_1_96]

Yeah I've got all the rekon stuff, yet to get to that part on the build thread, as for fiberglass I haven't gotten to it yet. It will need paint but they seem to be only spay canned as is so we'll see. I've been thinking about hi filling them and making them smooth and shiny and painting me properly but I dunno I'm in decided. Once it's getting used properly they'll probly get scratched up anyway. The bits that need chopping is the front edge of the rear pair as they were moulded on an extra cab. On a dual that edge comes past the front of the tub and nearly touches the rear of the cab. I'll post some pics when it's all done so it's clearer what I mean. If your not fussy you could cut it off and leave it.

[Blade]

There is actually a smooth style and a pocket style available;
http://www.junglefenderflares.com/toyota-hilux-c-7.html

[wainui123]

I spoke with a guy in the USA at Jungle Flares about front flares for my dual cab tray back it is going to cost me $180 for front only in either smooth or the textured (has sections for bolts/screws) and $40 for frieght.Just google Jungle flares or checkout facebook.You want the USA ones not the Thailand copies.

Mike

[Stef]

I spoke with a guy in the USA at Jungle Flares about front flares for my dual cab tray back it is going to cost me $180 for front only in either smooth or the textured (has sections for bolts/screws) and $40 for frieght.Just google Jungle flares or checkout facebook.You want the USA ones not the Thailand copies.

Mike

Did you end up ordering? If so got details of where I can order from?


Sent from my iPhone using Tapatalk 2